it has better peak performance and can handle more bass too. bigger and louder
The easieast way and probably the safest to buy an adapter from 6x9 to 6x8. Also you can cut out a form from a acrylic sheet so you can fill out empty space between speaker and a deck and install speaker with 4 screws.
Yes, a 6x9 speaker can fit into a 6x8 mounting hole, but it may require some modifications. The 6x9 speaker is larger, so it might not align perfectly with the mounting points of the 6x8 holes. You may need to create additional mounting points or use an adapter to secure the speaker properly. Always ensure that the speaker is mounted securely to prevent any rattling or damage.
I believe that there are two speaker grills on the dash they are 3.5 In. Than in the doors its 6in and in the rear it 6x8 but I put some 6x9 in mine!
Front speakers in the door are 5 1/4 Back speakers are 6x9, you can use adapter plates and run 5x7 or 6x8
6x8. You can get an adapter if you can olny get 6x9
6X8 most speakers are 6X9, pioneer makes a factory replacement for Ford/Mazda that is 6X8
Yes, with minor trimming.
To replace 6x9 speakers with 6x8 speakers, first, remove the existing 6x9 speakers by unscrewing them from the mounting location and disconnecting the wiring. Next, prepare the installation area for the 6x8 speakers, which may require an adapter plate to ensure a proper fit, as the dimensions differ. Connect the wiring from the vehicle to the new 6x8 speakers, ensuring correct polarity. Finally, secure the new speakers in place and test them to ensure proper functionality.
front 6x8 back 6x9
Hey, No you will need 5x7 or 6x8
6X9s because even though crutch field says 6X8 the are fudging wrong ! After two hours trying to take them off, they were 6X9 and have to return the one I bought.
I believe that the back speakers are 6x9, but the fronts are 6x8.