a pulley is a wheel with a grooved rim in which a rope, chain, or belt can run in order to change the direction or point of application of a force applied to the rope, etc.
There is a pulley in a car the pulley turns the belt that goes around it to turn another pulley that might turn the water pump, or alt., or a/c.
Hope this answers your question! :)
A crank pulley also known as a crankshaft pulley is an essential part of a car. It transmits the mechanical power and torque, or the force of motion, through the pulley system to additional car elements.
The idler pulley has nothing to do with the brakes. If the idler pulley is bad it could throw or break a belt, and then your engine will stop.
Which pulley are you referring to. There is 5 or 6 on that car.
It has the car belt wrapped around it, on the end of the car shaft.
The Answer is no.
Look on your car's engine.
The pulley on a mouse trap car acts as an extender (rods balloons etc.) , allowing the force of the pull to be stronger than one without a pulley based on it's positioning. There are 4 ways to use a pulley with a mouse trap car:1) Leverage2) Temperance3) Steering4) BalanceThere are also different types of pulleys to use on a mousetrap car.
Disconnect the battery.remove the serpentine belt.Unbolt the pulley.
A car engine
Pulley
To remove a crank shaft pulley you need to first jack up the car. Next, remove the bold holding the crack shaft pulley in place and remove the unit. Reverse direction to put the new crank shaft pulley on your car.
The pulley needs to be removed before you can extract the pump, you can get the pulley removal tool at a car parts store.