0
What else can I help you with?
How do you reset maintenance required on 2012 Toyota Sienna?
To reset the maintenance light on a 2012 Toyota Sienna, start by turning the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. Turn the ignition off, and then start the engine to ensure the maintenance light is no longer illuminated. If the light remains on, repeat the process.
How many ignition coils on a 2000 Toyota Sienna?
There is about three ignition coils , one for each 2 valves ...
Where is the hidden vin location on Toyota Sienna?
where are the position vin number secret in the toyota sienna
How do you find a replacement ignition key for a Toyota Sienna van?
dealer bring vin
What is the procedure to replace 2000 Sienna ignition wire?
Are you referring to the spark plug wires? Please specify.
How do you reset 2007 Toyota Sienna check engine light?
How to Reset the "MAINT REQD" Light on Toyota Sienna With the car started (ignition on), set the LCD odometer readout to total mileage (not trip A or B). Turn the car off (ignition key to the OFF position). Push in AND HOLD the button/knob that switches the odometer Turn key to ON position without starting the car. You will notice the maintenance light blink and go out. Release the odometer button/knob. Turn key to OFF position. That's it! The "MAINT REQD" light has been reset to warn you to change your oil in another 5,000 or 7,500 miles or so.
How do you reset the 'maintenance light' on a 1999 Toyota Sienna?
With the ignition switch in the off position, hold in the hold in the trip odometer. Now turn on your key and you will see a series of zeros begin to appear. Once that stops, your maintenance light will be reset.
What is the procedure to reset the maintenance required light on the 2005 Sienna?
With the ignition switch in the off position, hold in the hold in the trip odometer. Now turn on your key and you will see a series of zeros begin to appear. Once that stops, your maintenance light will be reset.
How do you reset the oil light on a 2011 Toyota Sienna le?
Set it to trip A and hold reset turn ignition off then turn ignition on and maintenance light will flash and your done.
How do you disable the theft alarm system on my 2002 Toyota Sienna?
To disable the theft alarm on a 2002 Toyota Sienna, put the key in the ignition and turn it halfway. Leave it in this spot for 10 minutes before starting the car.
Where is the Camshaft position sensor located in 1999 Sienna CE?
I would like to know the samething!
How do you reset the TPS light on a Toyota Sienna?
To reset the TPS (Throttle Position Sensor) light on a Toyota Sienna, first, ensure the vehicle is in the "On" position without starting the engine. Then, press the gas pedal all the way down and hold it for about 10 seconds, or until the light turns off. Release the pedal and turn the ignition off for a few moments before starting the engine to check if the light has reset. If the light remains on, further diagnostics may be necessary to address any underlying issues.
