0
What else can I help you with?
What is meant by brake pedal pads?
It would be the rubber pad that sits on your brake pedal. Unless they were referring to brake pads, which are the pads which enables your vehicle to stop by pressing the brake pedal.
If you experience brake failure with a vehicle that has antilock brakes what do you do to stop?
press down firmly on the brake pedal and keep holding down the brake pedal
Where is the stoplight switch on a 2002 Chrysler Sebring sedan?
The stop lamp switch is on a bracket above the brake pedal.The stop lamp switch is on a bracket above the brake pedal.
If your brakes fail pumping the brake pedal may build up enough pressure to restore your brakes enough to come to a stop?
If your brakes fail, repeatedly pumping the brake pedal can sometimes build up enough hydraulic pressure to restore limited braking function, allowing you to slow down and stop the vehicle. This technique may help if the issue is related to air in the brake lines or a temporary loss of pressure. However, it's important to also consider using the handbrake or downshifting to aid in stopping. Always seek professional help to address the underlying brake issue as soon as possible.
How do you stop a race car?
To end (stop) a race car, press the brake pedal.
When you skid are you supposed to hit the brakes when driving?
Pressing and holding the brake will have little effect. However 'pumping' the brake pedal will give you at least some grip to help you bring the vehicle to a stop. Additionally - you should always steer into a skid to keep control of the car.
What is the brake pedal used for?
The brake pedal is used to bring a motorized moving vehicle to a safe stop. Vehicles such as cars, trucks, bicycles, and all utilize a brake petal mechanism.
1995 Corsica comes to a stop brake pedal vibrates and car rolls a few feet?
Sounds like the anti-lock brake system. best to have a professional look at it.
What is the location of the stop light switch on a 1997 dodge 1500 4x4 ext cab?
It is on a bracket above the brake pedal. It reads off of the brake pedal.
Where do you find the stop light sensor on a 90 Toyota Camry?
If you are referring to the stop light switch,it is under the dash near where the brake pedal pivots.When you push on the brake pedal, the stop switch pops open and completes a circuit to the stop light lamps.
Which pedal do you press when you want to stop a car?
The brake pedal of coarse. It is usually the bigger and wider one of the pedals.
Why does the brake pedal push back on you when you come to a stop?
This is because of the antilock brake systems, or ABS. When the ABS is activated in a vehicle it can feel like the pedal is pushing back at you when you stop or start to slowly press the brakes.
