0
What else can I help you with?
Is The frame of the vehicle is normally attached to the positive battery post?
No. That would short out and potentially cause a fire. The negative side will go to the frame or the body to ground.
Where does the negative battery cable bolt to?
Depends on the vehicle, but normally it bolts to the engine. The negative is the ground cable.
Is the frame of the vehicle normally attached to the positive battery post?
No. That would short out and potentially cause a fire. The negative side will go to the frame or the body to ground.
Where is negative ground for 1997 ford E250?
In a 1997 Ford E250, the negative ground is typically connected to the vehicle's chassis. You can find the negative battery terminal attached to the battery, which is usually located under the hood. The negative cable usually runs from the battery to a grounding point on the engine block or the frame to ensure proper electrical grounding for the vehicle's systems.
How is the battery trminals hook up positive to positive or negative to positive?
Positive to positive, negative to negative if you are asking about installing one battery in a vehicle.
Is the negative battery cable considered as the ground?
The battery cable that is grounded, is connected to the body of the vehicle. Sometimes it is the negative cable & sometimes it is the positive. You need to check which cable is connected to the body of the vehicle.
What metal is used for Making battery terminal?
In most batteries, the negative terminal is made out of zinc and the positive terminal is made out of carbon. this may vary depending upon the type of battery and the amount of power it supplies.
When negative of a battery is connected to positive of motors then what will happen?
Dead short in the battery. Battery can explode and damage can be done to the electronics in the vehicle.
How do you stop the battieriess from reversing polarities when the batteries are in series?
In a negative ground system, hook the vehicle ground (frame) to the negative of the first battery, positive of that battery to negative of second battery and the positive of the second battery back to vehicle positive. ( starter or starter solenoid) If you are hooking 2 12 volt batteries in series you will have 24 volts.
Why would negative battery cable spark?
Something on the vehicle is on pulling power.
What battery cable do you disconnect before working on a vehicle electric system?
Negative.
How do you connect two deep cycle 12 volt batteries in parallel to an RV?
First off you must have the same type batteries. Connect the positive post of the first battery to the positive post of the second battery. Then connect the negative post of the first battery to the negative post of the second battery. Now connect the positive post of the first battery to the positive connection on the vehicle. Then connect the negative post of the first battery to the negative cable of the vehicle. Click the link for a diagram.
