No, You need to remove the door panel, the door wiring, pull it all through the large hole in the front of the door, and remove the door pins, there are usually lock washers that are hard to see that need to be removed to slide the pins out good luck!
i need 2 no how
Take it to the dealership.
brake pads shot
I think its behind the plastic on the back passenger side. Between the cargo glass and the passenger side back seat door glass.
how do you replace 1999 Toyota corolla corner light - passenger side
Yeah, it's doable, but it won't be a simple drop-in swap.
It would depend on which seal. There are several seals. Some are easy to replace while others are difficult.
To replace the evaporator coil in a 1999 Yukon, first, discharge the air conditioning system to safely remove refrigerant. Then, remove the dashboard and disconnect the HVAC unit from the vehicle. After accessing the evaporator coil, unbolt it from the housing, disconnect the refrigerant lines, and replace it with the new coil. Reassemble the HVAC unit, reconnect everything, and recharge the system with refrigerant.
go to your local machanic
SAME AS U DO THE PASSENGER SIDE
Yvon of the Yukon was created on 1999-09-09.
three screws accesible under dash on passenger side.