The odometer light fuse also controls other lights on your instrument panel. The odometer light can be removed by removing the instrument panel cover. Push the light bulb in and turn at the same time. The light bulb will come out. Replace it with a new light bulb.
The fuse that says "room".
Odometer Fuse Box RelationshipThat depends on the type of odometer. For example, a mechanical odometer which is driven by a mechanical cable will NOT have any connection to the fuse box OTHER than for lighting, IF the odometer has a light inside of it.On the other hand, if the odometer is of the digital electronic type, it will, in a remote manner, be connected to a fuse which is usually a fuse designated for the "Instrument Panel." In this case, the digital odometer is usually built into/on the Instrument Panel Printed Circuit Board [PCB], and thus will be connected to the fuse box via the PCB wiring harness.
There is not any fuse on any car that will disABLE THE ODOMETER. I
There is not an individual or separate fuse for the odometer
If there is just one light out, the bulb probably burnt out and needs to be replaced. A single bulb will not have a fuse.
The tail light fuse controls the headlights in a Nissan Altima. A second fuse box is located next to the battery.
There is no individual fuse. The ECM has 2 or 3 fuses, and it controls the check engine light.There is no individual fuse. The ECM has 2 or 3 fuses, and it controls the check engine light.
The fuse controls for the cargo light on a 2001 Chevy Silverado are located in the fuse panel just beside the brake pedal. It is labeled on the cover and can be replaced by the owner.
the dome light fuse...any other questions
what fuse controls the high stop light on a 2009 Hyundai sonata gls
See the 7.5 fuse in location 15 on the fuse box