no there is not because if water can leak outside of gasket water can leak inside too causing coolant to mix with oil eating the babbit from bearings
The 2002 Tacoma engine block will have two coolant drain plugs on each side of the block. The coolant drain plugs will be near the front and the rear of the engine block.
coolant leak between motor and transmission indicates you have a leaky freeze plug in the rear of the engine block
The coolant drain plug on a Nissan Micra engine block is on the upper part of the block. It is under the intake manifold.
Between the coolant hose and the engine block on the top driver side of the engine.
where is the coolant drain plug on the engine block of Honda ACCORD 2.4 2006
On the engine block between the first and second spark plugs on the drivers side of the engine.
If you look stright down between the water pump and engine block you will see the timing mark.
The engine block coolant drain plug on 4.3 liter Chevy Blazer is located on the bottom of the engine, near the oil filter. It allows coolant to be completely drained from the block during maintenance.
There is coolant in the engine block when the engine is not running. The engine block, heater, hoses and radiator remain full when engine is not running.
The head gasket sits between the head and the engine block if it is leaking out where you can see the coolant, yes you can smell the coolant if it is leaking into the engine no you cannot smell the coolant. You can check the oil to see if it has coolant in the oil if it does then the head gasket might be blown.
timing cover, it bolts to the block and covers the timing chain and gears, then the water pump bolts to it.
The engine block coolant plug on a 6-cylinder is near the bottom of the engine. You will need to use a socket set and ratchet to remove the plug.