most older mazdas have the stater located behind the engine when looking under the hood. It is under the mainfold...between the engine and firewall. You have to get to it from underneath and may require removing some brackets to get to.
The starter solenoid is located on top of the starter. It is the small cylinder attached to the starter. It is a part of the starter which can be replaced/repaired independent from the starter itself.
Underneath the car bolted to the bellhousing on the gearbox
Here are step by step instructions and how to changer miata starter : http://www.racecaddy.com/mx5/tech/starter-mx5.html enjoy
how do i remove the starter motor Mazda rx8
How to replace a starter on a 2001 Mazda Tribute?
The starter relay on a Mazda B2500 is typically located in the engine compartment, within the fuse and relay box. This box is usually found near the battery. You can identify the starter relay by consulting the diagram on the cover of the fuse box, which will indicate the specific relay's position. If you have difficulty locating it, referring to the vehicle's service manual can provide additional guidance.
The starter relay on a 1988 Mazda MX-6 is typically located in the engine compartment fuse box. To access it, open the hood and find the fuse box; the starter relay is usually labeled on the cover or in the owner's manual. If you have trouble locating it, refer to the wiring diagrams or service manual specific to the vehicle for more detailed guidance.
where is the starter
Where is starter on a 4 cylinder mazda 626?
The starter relay on a Mazda MX-6 is typically located in the fuse box under the hood. It is often positioned near the battery, alongside other relays and fuses. To identify it, refer to the fuse box cover for a diagram that indicates the specific location of the starter relay. If you're having trouble locating it, consulting the vehicle's service manual can provide additional guidance.
The starter on a Mazda mph is on the left side of the engine. It is at the rear, against the bell housing.
locating sparks plugs in a 2007 mazda3 engin