Something is going wrong in the emission control system. Most of your friendly auto parts stores have diagnostic code readers. They usually check your car with their readers for free. My local Advance Auto Parts Store and Auto Zone store checked mine when my light came on and told me what was going wrong.
Yes.
Talk to your Mazda dealer but, it sounds like a problem with your automatic transmission and just like a check engine light it may be a number of problems.
Unplug negative cable of battery, wait 30 sec & plug cable wite back, engine light reset ...walah!
P0442- Evaporator system small leak. P0440- Evaporator system malfunction.
It means Cylinder misfire. Stop driving this car until you can have this repaired.
A Mazda 6 engine light could be coming on after rain because you need new spark plugs. Water could also be getting in through the cold air take causing the light to come on.
I also have that code P061B in my Mazda 6 2010, What I've heard is that it may be a weak battery, I'm having my battery checked first, before advancing to other areas.
The engine computer controls the check engine light.
misfire cylinder number 6
To reset the maintenance light on a 2010 Mazda 6, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. After that, turn the ignition off and then start the engine to ensure the maintenance light is reset. If the light remains on, repeat the process.
Powertrain Control Module +B Voltage Low
The AT dashboard light on the Mazda 6 means there is a problem with the transmission.