The oil pump is located towards the front of the engine on the driver side. Below is an attached link with a diagram that displays the location.
The proper oil type is important to keep a vehicle running correctly. 5w-20 oil is the oil that a 1996 Mazda b2300 uses.
The oil pressure sending unit is located on the driver side near the firewall in the side of the cylinder head. Below is an attached link with a diagram that shows the location.
20w 50 dude!
Could you tell me how would you replace the oil pump on a Mazda Protege?
A 2002 Mazda B2300 typically requires about 4 quarts of oil when performing an oil change with a new oil filter. It's always a good idea to consult the owner's manual for the specific oil capacity and recommendations for your vehicle. Additionally, using the correct type of oil as specified by the manufacturer is important for optimal engine performance.
4.5 U.S. Quarts
It should be in the oil pan.
The oil pump is bolted to the bottom of the engine , inside the oil pan
To replace the oil pump on a Mazda B2200 2.2, first, disconnect the battery and drain the engine oil. Remove the oil pan by unbolting it, then detach the oil pump from the engine block by unscrewing the mounting bolts. Install the new oil pump by securing it in place, reattach the oil pan, and refill the engine with oil before reconnecting the battery and starting the engine to check for leaks.
what type of gear pulley to use to take off oil pump on 1996 Mazda mellinia?
In the oil pan
in the oil pan