I think there are two different flashers one for blinkers and one for the flashers.
replace your flasher relay
probably the flasher unit or the multifuntion switch in the steering column but i think probably the flasher unit
Check fuse, bulbs, and flasher relay.
Check fuses and turn signal flasher
it is behind the glove box.
More than likely the Flasher Relay is defective. Replace it.
sync server has stopped working mdcrash reporttool has stopped working.?
in dash lights
Have no idea, however, my fan stopped working altogether after a funny smell of over heated electrical components. I had both 12v power sources in use (phone and gps), then started working again after cool down. All fuses were ok.
i fnone of the turn signals work, the first placeto look is the flasher can. this is a clyander usually located in or near the fuse box. there are 2 of these.1 is for turn signals, other is for 4 way flashers
Loose or broken wiringIt is because your turn signal is wired through the ignition switch. The hazards are wired elsewhere. I had the same problem with wires becoming loose. At first the turn signals wouldn't work, then the ignition switch became erratic and eventually stopped working. You will most likely have to replace the wires or discover where in the steering column they have come loose.
Perhaps Ignition switch Wipers Work?