answersLogoWhite

0

You may have a bad master cylinder, or proportioning valve,
Does the vehicle have Antilock Brakes (ABS) ? Please let me know.
Ben

User Avatar

Wiki User

18y ago

What else can I help you with?

Related Questions

Do you need to put new brake fluid in after changing the front brakes?

No


Just changed your front and rear brakes and shoes. The brake light turns on until you put in more brake fluid. The brakes feel if they were almost touching the floor at times. What could cause this?

If you are losing fluid and the pedal is low, you have a brake fluid leak.


Which brake fluid reservoir on 1998 Chevy S10 connects to back brakes?

The brake cylinder connects to both front and rear brake systems. The front and rear brakes are connected though a diagonal fluid distribution system. any more questions email me at philip.dharamraj@hotmail.com


Why do the front brake calipers freeze after putting new brakes on a 1997 Ford E150 Van?

Corrosion? Contaminated brake fluid?


Brake light stays illuminated on a 2001 ford escapes dash the front brakes have new brakes and rotors could this be due to worn rear brakes what may be other causes?

have you checked your brake fluid??


Why won't the front brakes release on my vehicle?

The front brakes may not release on your vehicle due to issues such as a stuck caliper, brake fluid leak, or a problem with the brake pads. It is important to have a professional mechanic inspect and repair the brakes to ensure safe driving.


Should both chambers be full of brake fluid in a 1986 ford f 150 master brake cylinder?

yes , 1 chamber is for the front brakes and the other chamber is for the back brakes


The front brakes are locking up on a 1989 Toyota Cressida after replacing calipers and master cylinoid?

Sounds like air in the brake lines or power steering fluid in the brake system instead of brake fluid.


Do you need to bleed all brakes when you change front brake pads for 96 Chevy Blazer?

Does this Blazer have four wheel disc Brakes? NEW ANSWER: There's no reason to bleed brakes if you did not open the system.( where brake fluid came out )


Why does the front brakes drag on a 002 dodge Dakota?

Sticking brake calipers. This can be caused by moisture in the brake fluid which will cause the calipers to rust. Replace the calibers and replace all the brake fluid. It can also be caused by driving with your foot on the brake.


What causes front disc brake to lock up?

Bad fluid in master cylinder,flush system,bleed brakes


Why do my front brakes keep locking up on a 1984 Dodge pickup?

it is possible that your brake hoses are bad and soft not letting the brake fluid back out of your calipers