red
( # 28 ) is for the front cigarette lighter and ( # 22 ) is for the rear cigarette lighter / power plug Both fuses are yellow color , 20 amp
No, the cigarette lighter fuse is not large enough to handle below nor is the wiring.
notthing
Use your 12V plug.
Plug it into the cigarette lighter.
25
To wire a 12-volt cigarette lighter plug to a backup camera LCD monitor, first ensure the monitor is powered off. Strip the ends of the wires from the monitor and the cigarette lighter plug. Connect the positive wire (usually red) from the monitor to the positive terminal of the cigarette lighter plug, and the negative wire (usually black) to the negative terminal. Secure the connections with heat shrink tubing or electrical tape, ensuring no wires are exposed, and then plug it into a 12-volt socket to test the setup.
They are not on the same fuse,and some cigarette lighters wont operate unless the engine is running,or key is in acc.position. Additionally the rear AC plug is directly connected to the engine but the cigarette lighter is not.
The RadarHAWK SM Instant Wireless Radar Detector doesnt require a cigarette lighter.
If you are talking about the standard cigarette lighter socket in an automobile, you can only use devices that can run on 12 volts DC ((most modern cars) within the rated AMP load capacity. A standard house outlet is designed for 110 volt AC devices that have a 110 volt AC source
Fuse.
Check the fuse rating