answersLogoWhite

0

sometimes it is very hard to find matching gaskets . but i personally stand by cardboard it lasts longer all u gotta do is cut the cardboard exactly the same way as the gasket get sum gasket adhesive an bolt in plac just thought i would try to help you . i know it may sound ghetto but hey i works

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

Where is the starter on a 2005 Chrysler Sebring?

It is on the front of the engine, behind the engine mount bracket.It is on the front of the engine, behind the engine mount bracket.


Where is the starter on a 2000 Chrysler Sebring convertible?

It is on the front of the engine, behind the engine mount bracket.It is on the front of the engine, behind the engine mount bracket.


Where is the starter for 2001 2.7 liter Chrysler sebring lxi?

It is on the front of the engine, behind the engine mount bracket.It is on the front of the engine, behind the engine mount bracket.


Where is the starter located on a 2005 Chrysler sebring?

Front center of the engine, behind the motor mount bracket.Front center of the engine, behind the motor mount bracket.


Where is the starter on a 1999 Chrysler Sebring convertible?

The starter is on the front of the engine, behind the engine mount bracket.The starter is on the front of the engine, behind the engine mount bracket.


What will be the approximate position of the first quarter moon on march twenty first?

Whenever the moon is at first quarter, whatever the date happens to be, it's position is a quarter of the sky behind the sun. So it rises in the east roughly six hours after the sun rises, it stands straight south of you roughly six hours after noon, and sets in the west roughly six hours after sunset.


How do you change a water pump on a 2003 Grand Prix 3100 V6?

It's behind the big bracket with the water lines running through it and behind all the belts. Pulling the alternator will give you room to work. BE CAREFUL pulling the bracket off! It breaks easily. It's behind the big bracket with the water lines running through it and behind all the belts. Pulling the alternator will give you room to work. BE CAREFUL pulling the bracket off! It breaks easily.


Where is thermostat on 89 ford 7.3 diesel?

behind fuel bracket


How do I properly install an anti-tip bracket for a stove to ensure safety in the kitchen?

To properly install an anti-tip bracket for a stove, follow these steps: Locate the bracket and screws that came with your stove. Position the bracket on the floor behind the stove, ensuring it is centered. Use a drill to secure the bracket to the floor with the screws provided. Slide the stove back into place, making sure it fits securely against the bracket. Test the stove to ensure it is stable and does not tip over easily. By following these steps, you can ensure that your stove is properly secured and reduce the risk of accidents in the kitchen.


Where is the crankshaft Position sensor for the Kia optima 2001 4 cylinder?

Behind the lower timing belt cover. You will need to remove the power steering pump bracket(among other things) in order to remove


Harley FXDL Choke will not stay out?

Try tightning the bolt behind the bracket


Where is the Jack in a Peugeot partner?

Behind the driver seat. It has a bracket which the jack rests in.