0
What else can I help you with?
What is the intake torque specs and ordering for a 3.8L on a 2001 Pontiac grand prix?
The 2001 Pontiac Grand Prix 3.8 liter engine intake bolt torque specification is 45 pounds. The intake bolts should be torqued in 15 pound intervals.
What is the intake manifold torque specs and ordering for the 3.4L on a 2001 Pontiac Grand Am?
need torque specs for 3.4 pontiac grand am intake and rocker arms
Where is the EGR Valve located on a 2000 Pontiac Grand Am 2.4 4 cylinder?
The EGR valve is located on the side of the intake on the 2000 Pontiac Grand Am. It is close to the intake manifold.
How do you replace the valve cover bolts on a 2001 Pontiac grand am?
with a wrench.
How do you replace upper and lower intake gaskets on a 2002 Pontiac grand prix gtp?
To replace the upper and lower intake gaskets on a 2002 Pontiac Grand Prix GTP, first, disconnect the battery and remove any components obstructing access, such as the air intake and throttle body. Then, remove the intake manifold bolts and lift off the upper intake manifold, followed by the lower intake manifold. Carefully clean the gasket surfaces, install new gaskets, and reassemble the manifolds, ensuring all bolts are torqued to the manufacturer's specifications. Finally, reconnect all components and the battery before starting the engine to check for leaks.
What is wrong with a 1994 Pontiac Grand Am V6 auto trans if it starts and goes in R but stalls in D?
tourque converter is gone bad , or trans. internal damage
How many bolts on a powersteering pump in 1999 Pontiac GRAND AM v6?
3
Which bolt to remove engine from transmission on 1989 Pontiac grand am 2.5?
Bell housing bolts and the torque converter bolts.
Where is the thermostat located on a 2006 Pontiac grand prix?
On a 2006 Pontiac Grand Prix, the thermostat is typically located on the engine's upper intake manifold, near the front of the engine. To access it, you may need to remove the air intake duct and other components for better visibility. It’s usually housed in a thermostat housing, secured by bolts. Always refer to a repair manual for specific details and procedures.
1995 Pontiac grand am center console removal?
The 1995 Pontiac Grand Am center console is held in place with for retaining bolts. Remove the shifter knob. Remove the center console retaining bolts. The center console will come off.
Do you need hydraulic lift to change intake manifold gaskets on Pontiac grand Am 2000?
No
What are the engine mount tourque specs on a 1999 Pontiac Grand Am GT?
80 pds and then after alternating the bolt give them just a quary\ter turn more but remember to alternate pattern
