To reset the check engine light on a 2005 Chevy Malibu, you can use an OBD-II scanner to clear the trouble codes. Alternatively, you can disconnect the negative battery terminal for about 10-15 minutes, then reconnect it, which may also reset the light. However, if the underlying issue hasn't been resolved, the light will likely reappear. It's advisable to diagnose and fix any issues before resetting the light.
To reset the check engine light unplug the battery for 30 minutes. If the issues still persists the light will still light up when reattached.
NO. has to be cleared with a scan tool
Disconnect the negative battery terminal for at least 30 seconds.
if you are looking to reset a check engine light or any trouble codes, you will need to have it done with an OBD2 handheld scanner.
first you want to find out why the check engine is on then go from there . if you have an auto zone thay will check it for free good luck
Time with no problems will make the light go out or you can hit the reset button on the test unit. If you have an auto parts store nearby, they will very often do this for you.
That would work on cars before 1995 but it will not now. The computors have more knowledge and have to be reset with a scanner.
The check engine light is reset with a scan tool after repairing the cause of the fault.The check engine light is reset with a scan tool after repairing the cause of the fault.
Unless you have a scanner or the equalivant then you think you reset it when in reality you have only had to reset the clock.
The check engine light has to be reset with a OBD scan tool
You reset the check engine light with a scan tool after repairing the failure.
hoe do you reset the check engine light in a 1995 land rover