with key in "ON" position, press and hold volume button for 2 seconds
The code varies from car to car. You will need to contact the local Honda dealership to see if they can provide you the code to reset the Pilot's radio.
There is nothing to reset except the radio. Insert the 5 digit radio code to reset the radio and then reset the clock and presets for stations.
To reset the radio in a 2002 Honda CR-V, first, turn the vehicle's ignition to the "On" position without starting the engine. Then, disconnect the negative terminal of the battery for about 10 minutes to reset the radio system. Reconnect the battery terminal, and the radio should reset. If the radio is locked, you may need to enter a security code, which can be found in the owner's manual or obtained from a Honda dealer.
To reset the radio on a Honda Civic, first, turn off the ignition and remove the key. Then, disconnect the negative battery cable and wait for about 10-15 minutes. Reconnect the battery cable, turn on the ignition, and the radio should reset. If it has a code, you may need to enter the security code that came with your owner's manual to reactivate it.
To reset the radio in your Honda you will need the security code for the radio. This usually is included in the car's manual or you can also go to Honda's website and input your car's VIN number to retrieve the code. Once you have the code the car manual will walk you through the steps of resetting the radio.
Don`t buy another Honda! While I agree largely with the above statement, especially since it shouldn't be such an ordeal to change out a battery the simple answer is as follows. While connecting the battery as in my case have an assistant manually or remotely lock and unlock the door a few times. That should silence the alarm. Next you'll need to get the radio and navi codes from your dealer to reset the radio and navi systems.
By inserting a 5 digit code into the radio by means of the station preset buttons. If you do not have the code then go to the Honda Owners Link and register your Honda. There you can get the code for free.
To reset the clock on a 2003 Honda Accord the battery can be disconnected. Another way requires removing the radio fuse located inside the cabin fuse box.
first you need the serial number of the radio which is located on the back of the radio. Honda will charge you about $60 to remove the radio and get the serial number. once Honda has the serial number they can look up the radio code on their computer system
Radio code needs to be inserted and station presets will need to be reset. Also clock will need to be reset. Nothing else.
The code needed to reset the radio is the model number on top of the radio. The you must call a Honda dealer to get the code. If you are the original owenr or have the owners manual, the code may be in the written in the manual. i need to know how to enter the code on the radio the radio reads ERR 3
To reset the error in a 2002 Honda Accord radio, first, turn off the ignition and remove the key. Then, disconnect the negative battery terminal for about 10 minutes to reset the system. Reconnect the terminal, start the car, and turn on the radio. If the error persists, you may need to enter a security code, which can typically be found in the owner’s manual or obtained from a Honda dealer.