If you had an Owner's manual you could just look there for an answer. You need an owner's maual. Dealer, salvage yard, ebay, and many online sites are a source. Get yourself an owner's manual.
To reset the tire pressure sensor on a 2004 Mercury Mountaineer, start by checking and adjusting the tire pressures to the recommended levels. Next, turn the ignition to the "ON" position without starting the engine. Press the reset button, usually located under the steering wheel or in the glove compartment, until the tire pressure light blinks three times. Finally, turn the ignition off and then back on to complete the reset.
If the tires are all at the correct pressure, then you have a failed sensor and will need to bring it in for service.
new tyre pressure sensor reset megane Sometimes resets if you blow up the tyre about 5 lbs above then adjust to correct pressure.
To reset the pressure sensor on a 2004 Cadillac DTS, first, ensure that the vehicle is turned off. Then, locate the fuse box and remove the fuse for the tire pressure monitoring system (TPMS) for about 10 seconds before reinserting it. After that, turn the ignition to the "On" position without starting the engine and press the gas pedal three times to reset the system. Finally, drive the vehicle for a few minutes to allow the system to recalibrate.
how do you reset the tire pressure warning light on a 2004 pontiac grand prix
Do you mean fuel pressure sensor? If so please post year, make, model and engine size.2004 mercury monterey.{dont know engine size}
press the reset button and hold for 2 seconds.
Disconnect the negative side of the battery
The sensors are wheel position specific. They should reset themselves. If they are not in correct position they will not reset.
No, the sensor will need replaced.
lower right front of the engine
I'm trying to find out what kind of tire pressure sensor would my 2004 monte carlo need?