One website said it should be no more than 10k to 15k Ohms per foot. Another site said 5000 ohms per inch. So those sites are quite different from each other.
To much resistance in the spark plug wires, replace the spark plug wires.
Spark plug wires can go bad in several ways. They can develop shorts, or they can just build up resistance. To test for shorts, go out at night and open your hood and let your engine run. If you see little flashes, or hear pops, you probably have cracked wires that need to be replaces. To test for high resistance, you need a multimeter that can test for ohms (the resistance between two points.) You take off the spark plug wire and touch one probe of your multimeter to one end of the plug wire, and the other probe to the other end. Normal plug wire resistance should be 10,000 to 15,000 ohms per foot of length. If it is higher, it is probably bad.
To much resistance in the spark plug wires. Start fresh with a new distributor cap, rotor and spark plug wires. Also be sure you have the correct spark plugs installed.
No, Using a resistor spark plug with resistor wires can create too much resistance for the ignition system.
A 2000 Concorde does not have plug wires. There are individual coils on each spark plug.A 2000 Concorde does not have plug wires. There are individual coils on each spark plug.
The spark takes the path of least resistance. The boot may be old and cracked and/or the spark plug may be worn and has a large gap at the electrode.
The spark plug wires on your 1994 Chevrolet Caprice are quite easy to change. The spark plug wires simply lift off on each end. Put the new spark plug wires on and push until you feel a click.
There are electrical wires all around the vehicle. If you are looking for spark plug wires, it does not have any. It has individual coils directly on each spark plug.There are electrical wires all around the vehicle. If you are looking for spark plug wires, it does not have any. It has individual coils directly on each spark plug.
1000 ohms per 12 inches.
Don't soak it in any forms of water or else you motor won't work.
at the end of the spark plug wires
OEM are the best spark plug wires for the Honda cbr. These spark plug wires can be found at the local Honda dealership.