Disconnect the linkage and reverse it. If is comes in from the top then turn it 180 degrees and replace it from the bottom with pin on top or vice versa.
The 2001 Chevy Cavalier automatic transmission shift linkage is held in place with a swivel nut on each end of the shift linkage. Turn the swivel nuts to the left and the shifting linkage will come off. Reverse the process to install your new shift linkage.
Bent shift linkage Frozen shifting linkage - try lubricating
yes
on the trans shift linkage
Yes it will fit, but it won't work... The 89 computer is not programed to the 4L60E transmission, Therefore the transmission will not shift are even work.
It is on driver side of Transmission behind the shift linkage
http://www.dmctalk.com/showthread.php?t=8699
ce faci? sunt andrei
OnV6 4.3 with 4L60E transmission will faulty shift solenoid cause not to shift into high gear?
The transmission uses a cable for linkage. If the car has consol shift the cable runs from the shifter to the transaxle. If it is a column shift the cable runs from a lever on the column to the transaxle.
Your shift linkage may have slipped or become loose. Check your linkage.
Bad transmission? Bent shift linkage?