Always the negative cable first.
Disconnect the negative - terminal first, then the positive + terminal. Unfasten the battery hold down clamp. When reinstalling the terminal connections connect the positive terminal first.
The negative terminal of a battery has a - sign and positive terminal has a + sign.
Energy flows from the negative terminal to the positive terminal of a battery.
Connect the positive + cable first and negative - last. When disconnecting them disconnect the negative - first and positive + last.
The positive end of a battery goes to the positive end of the terminal. In retro spec, the negative end of a battery goes to the negative end of the terminal.
Disconnect the negative terminal first. Then disconnect the positive terminal. Pull the ends straight up. Unbolt the top of the battery frame and lift up the cover on the battery.
When charging a car battery, you should always disconnect the negative terminal first. This helps prevent any short circuits or sparks that could occur if the positive terminal is disconnected first while the battery is still connected to the car's electrical system. After charging, reconnect the positive terminal first before reconnecting the negative terminal.
To replace the positive battery cable on a 1996 Ford Aspire, first disconnect the negative battery terminal to ensure safety. Then, remove the bolt securing the positive cable to the battery terminal and detach the cable. Install the new positive cable by connecting it to the battery terminal and tightening the bolt securely. Finally, reconnect the negative terminal to complete the process.
What happens when you inadvertently crossed the positive battery terminal from a negative to a positive and a positive to a negative.?Read more: What_happens_when_you_inadvertanly_crossed_the_positive_battery_terminal_from_a_negative_to_a_positive_and_a_positive_to_a_negative.
To charge the battery on a Suzuki Intruder, first, ensure the motorcycle is turned off and disconnect the battery terminals, starting with the negative (black) terminal followed by the positive (red) terminal. Use a compatible battery charger, connecting the positive charger lead to the positive battery terminal and the negative lead to the negative terminal. Set the charger to the appropriate voltage and amperage, and allow it to charge until full. Once charged, reconnect the terminals in reverse order, positive first and then negative.
make sure radio settings/presets are saved disconnect negative battery terminal disconnect positive battery terminal unscrew the battery mount take battery out put new battery in put the mount back reconnect battery terminals
The positive terminal of a battery is where electrons flow out, while the negative terminal is where electrons flow in.