The bulb plug can be pulled off carefully. Give it a wiggle, it may be tight.
It is covered in a rubber boot.
Once the wiring is unplugged, remove the large circular rubber boot around the lamp housing.
With the boot off, you can see the back of the bulb, held in place with a wire clip.
The wire is arranged with a slight raised handle, push this forward and unhook it off a latch.
The bulb should now fall out.
The new bulb will only fit one way round.
Do not touch the new glass bulb with your fingers. The oils in your fingers will cause a hot spot and premature failure. If accidentally touched, wipe with a tissue soaked in alcohol.
Observe the cut out notch in the lamp base and orientate it correctly, before latching the wire clip to hold it in place.
Replace the rubber boot and plug the wiring back onto the bulb.
Access to the right hand side is restricted by the air cleaner box. You may have to remove this to get to the back of the headlamp.
It depends on the year of your Baleno, is it 95-98 or 98-01?
Need to remove bumper
In the manual it states that you have to remove the grill and radiator to get at the casing for the headlight.
To change the headlight bulb on a Suzuki Vitara, first, ensure the vehicle is turned off and the keys are removed. Open the hood and locate the back of the headlight assembly; you may need to remove a cover or disconnect the electrical connector. Twist the bulb socket counterclockwise to remove it, replace the old bulb with a new one, and reassemble by reversing the steps. Always handle the new bulb with clean gloves to avoid oil contamination.
My headlight is not working on the passengers side. Do I need to change out the headlight assembly or can I simply change out the bulb? My headlight is not working on the passengers side. Do I need to change out the headlight assembly or can I simply change out the bulb?
How to change headlight bulb 2011 ram 3500
To change one's back headlight, one must first uncover the light bulb. Then one must unscrew the bulb. One must have another bulb to change the headlight. Screw in the new bulb.
To change a headlight on a 2002 Suzuki XL-7, first ensure the vehicle is turned off and the keys are removed. Open the hood and locate the headlight assembly; remove the electrical connector from the back of the bulb by pressing the tab and pulling it out. Twist the bulb socket counterclockwise to release the old bulb, then replace it with a new one, ensuring not to touch the glass. Finally, reattach the electrical connector and secure everything back in place.
you will probably have to take the complete headlight assembly out to get enough room to change the bulb.
2007 Suzuki XL7 headlight bulb replacement: Purchase the correct replacement headlight bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the headlight bulb replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
You cannot replace the headlight bulb. You need to buy a new headlight unit.
2005 Suzuki Reno high beam headlight lamp is a 01003/H1 bulb. See sources and related links below for more information.