the spindle is stripped out tighten it up
The wiper blade for a 1994 Honda Accord is 24 inches on the driver-side. For the passenger side the wiper blade is smaller, at only 20 inches.
The longer blade goes on the driver's side.
I have a 2008 Honda Pilot myself. The driver's side is a 24" in. blade, and the passenger side a 21 in. blade.
24 inch on drivers side and 18 inch on passenger side.
24" on the drivers side an 19" on the passenger side. I recommend the Rain-X Fusion wiper blade. I have them on my 2004 Accord right now and they are excellent blades.
Driver size 20 (500mm) Passeger size 17 (430mm)
The 2006 Honda Civic takes 28" driver side and 25" passenger side replacement wiper blades.
On throttle body. It lets in extra air at idle when engine cold and throttle blade is closed.
Take a tape measure and measure it. OR - see sources and related links below.
The 2008 Honda Accord has hook-end wiper arms. See the Sources and Related Links section below for installation videos and correct attachment/length wiper blade sizes. Also, if you purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.
Answer:The 1998-2002 Honda Accord takes 24" driver side and 19" passenger side replacement windshield wiper blades on the front. See sources and related links below for more information. Since there are over 22 different wiper arm attachments, do not buy wipers just by length only. Be sure to lookup exact wiper blade part numbers by vehicle make, model and year for the brand wiper you decide to purchase. This ensures correct length AND correct attachment.
The 1993 Honda Accord has the most common hook-end wiper arms. See related link below for installation videos. Lift wiper away from glass. Press button or tab in the area where the wiper blade is inserted into the hook. Pull wiper out of hook. Sometimes you need to rotate and flex the blade to make enough clearance for the hook to pass through.