answersLogoWhite

0

If the stereo has power but the screen does not light up, the issue could be related to a faulty display unit or a loose connection within the stereo itself. It's also possible that the wiring harness is damaged or not securely connected, leading to a lack of power to the display. Additionally, if the stereo has internal issues or a blown fuse, that could prevent the screen from functioning. Checking connections and considering a replacement of the stereo might be necessary.

User Avatar

AnswerBot

4d ago

What else can I help you with?

Related Questions

What the problem when a Pontiac Sunbird LE won't start?

My Pontiac Sunbird wasn't starting for a friend of mine, and I had never had the problem. But I figured out that you have to be in First gear to start it, so check that. Also there might be a bad starter or something like that. Hope that helps Rovert


Why does 1990 Pontiac Sunbird idles rough after tuneup?

Did they replace the MAP sensor? If not, good chance there's your problem.


Your 92 Pontiac sunbird just started smoking again after you thought your mechanic fixed the problem last week what do you do?

take his cigarettes off him


Your Pontiac Sunbird is losing oil and expelling smoke by the muffler?

The most common reason for your Pontiac to lose oil and ex smoke from the muffler is a broken piston ring. A malfunctioning exhaust valve can also cause the problem.


1992 Pontiac Sunbird the 1 cylinder is not firing where can it be?

Bad spark plug Bad plug wire Burned valve Bad piston Do a compression test to see if the problem is engine internal


Can you adjust the idle on a 1989 Pontiac Sunbird?

Idle speed cannot be adjusted on this model. No manual adjustments available. Problem may lie in fuel pump, or fuel filter or temp sensor.


Where is is the fuel pump on 1991 Pontiac sunbird?

1993 escort wagonahoy mate. i had the same problem on a similar car. ford, escort 1993. i took it to a friendly mechanic, he told to follow my heart and the gas line to find the gasoline pump! now, I've changed pumps on over three cars and raving results of thanks have happened.


Why did 93 Pontiac sunbird start getting no gas when push on the throttle and now won't start?

There are many parts to a car that must be maintained. This problem can be caused by a bad fuel pump, filter, or fuel injectors.Ê


What would cause a roaring sound when you turn on the engine in your Pontiac Sunbird?

A roaring sound when you start your Pontiac Sunbird's engine could be caused by several issues, including a malfunctioning exhaust system, such as a damaged muffler or exhaust leak, which can amplify engine noise. Additionally, worn or damaged engine mounts may lead to excessive vibration and noise. Another possibility is a problem with the air intake system or a failing accessory, like the power steering pump or alternator. It's advisable to have a mechanic inspect the vehicle to diagnose the exact cause.


Will removing the thermostat in your 83 Pontiac sunbird help with it overheating?

It MAY help with the overheating problem....but you really need to find out why it's overheating. Blown head gasket, stuck thermostat, bad water pump, fan not coming on, etc.


How do you reset the check engine light on a 1989 Pontiac sunbird le?

You do not reset the check engine light on that year of sunbird, it will go off automatically whenever you fix whatever problem the computer is reading. Most likely it is one of your sensors that is malfunctioning. Check your Air Intake Temp Sensor (AIT) and your Oxygen Sensor (O2) as they are the most likely culprits.


What causes the fuel gauge temperature gauge odometer speedometer not to work on Pontiac Sunbird?

If the fuel gauge, temperature gauge, odometer, and speedometer are not working on a Pontiac Sunbird, it could be due to a faulty instrument cluster, a blown fuse, or issues with the vehicle's wiring or connectors. Additionally, a malfunctioning vehicle speed sensor (VSS) can affect both the speedometer and odometer. Checking the fuses and inspecting the wiring for damage are good first steps in diagnosing the problem. If those are intact, the instrument cluster or VSS may need to be tested or replaced.