answersLogoWhite

0

It holds the alternator down firmly.

User Avatar

Wiki User

10y ago

What else can I help you with?

Related Questions

How do you jump start BMW 530i?

A BMW 530i is jump started by connecting the cables to the positive leads on both vehicles. The negative leads are connected to strong grounds like the alternator bracket.


Where is the alternator on a 1986 BMW 325?

The alternator on this car is mounted at the front of the motor on the driver's side. It is above the power steering pump. To remove it it's best to remove the MAF sensor for easy access to the bracket.


How do you change the alternator on 1992 BMW 318I?

How do you change the alternator on a 1992 BMW 318 I


How do you replace a 2006 BMW 550i alternator?

how do you replace a alternator in a bmw 550i 2006


Where is the alternator fuse located on a BMW?

what the meaning of bmw


What is the name of the mounting post on the Lincoln mark viii alternator?

alternator bracket


How do you remove an alternator bracket on a 1998 Dodge Caravan 3.3 Liter engine?

remove belt, remove alternator plugs, then bolts. pull out alternator. then undo bolts for bracket and remove.


How do i adjust alternator belt on a 2002 protege?

you will find a bolt at top alternator connecting it to the bracket arm loosen it a little. you will find another bolt parallel with the bracket tighten it to pull the slack out of belt. tighten the bolt connecting alternator to bracket


How would you route the alternator belt for a 1987 325 BMW?

how do u tighten up an alternator belt on a 1987 BMW 325i?Answerhow do u tighten up an alternator belt on a 1987 BMW 325i?


Is there a trick to removing the alternator bracket from a 1995 Jetta?

You should be able to remove the alternator bracket, on your 1995 Jetta, by removing the three retaining bolts. The bracket should easily come off.


How to replace alternator bracket gasket on 2005 BMW 545i?

remove the alternator, remove mounting bolts for steering pump and position aside, remove upper engine mount bolt/nut, support engine with sling, remove the upper engine mount bracket, then finally accessory bracket. whole job with proper tools and equipment takes approx. 5 hours to do. I would not attempt to do this as a driveway repair.


How does a car break the alternator bracket. I have a 1995 Chevy Astro Van and it has broken the alternator bracket twice in about a week or 2. I replaced it and it broke again. How does this happen?

do you mean the aluminum bracket holding the alternator broke at the bolt holes? do you know that there should be a steel bracket BEHIND the alternator also? when engine usually replaced, sometimes this steel bracket is not replaced and instead a shorter bolt is used to fasten alternator (3 bolts) to aluminum bracket. there should be a longer bolt which goes from the front of the alternator on the left side, thru the alternator and thru that steel bracket and into part of engine?? this part not clearly understood as explained to me by mechanic husband. he had the same problem and corrected when bracket kit purchased from local Chevy dealer; about $197 in Hawaii. hope this bit helps...