If a plastic lens, drill a very small hole at the bottom to let water drain out. If a glass lens, you will have to replace.
Remove the wiring harness from the back of the headlight. Remove the headlight assembly bolts. The headlight assembly will come out.
there is 3 10mm bolts on each headlight all you have to do is loosen then all and they will pop loose and there own no bumper removal necessary
To remove the headlight from the housing of a Chevy Metro, first, open the hood and locate the headlight assembly. Disconnect the electrical connector by pressing the tab and pulling it out. Next, remove the screws or clips securing the headlight assembly to the housing. Finally, gently pull the headlight out of the housing to complete the removal.
206gti.net has a useful guide with pictures for headlight removal... http://206gti.net/globechange/
To remove the headlight from a Honda Del Sol, first, open the hood and locate the headlight assembly. Disconnect the electrical connector by pressing the tab and pulling it out. Then, remove the screws or bolts securing the headlight assembly in place, usually found at the top and side. Finally, gently pull the headlight assembly out of the housing to complete the removal.
To remove the headlight from a 2000 Honda Civic, first, open the hood and locate the headlight assembly. Remove the screws or bolts securing the headlight, typically found on the top and side of the assembly. Disconnect the wiring harness by pressing the tab and pulling it out. Finally, gently pull the headlight assembly out of the socket to complete the removal.
To remove the headlight from a Renault Espace, first, open the hood and locate the headlight assembly. Disconnect the electrical connector by pressing the tab and pulling it out. Next, remove any retaining screws or clips securing the headlight, which are typically located at the top and sides of the assembly. Finally, gently pull the headlight out of its housing to complete the removal.
You will probably have to take the complete headlight assembly out or loose to be able to get to the bulbs.
There's a chrome trim ring around the headlight, which pries off. Remove it, and you'll find another ring around the headlight, which is held on with three screws. Remove the three screws and the ring, and the headlight will fall out in your hand. Unplug the old, plug in the new and..."installation is the reverse of removal."
unhook 6 black slide clips from top of grille, and 5 black slide clips from bottom of grille, and remove chrome trim screws (4) from headlight assembly and unplug headlight and swap it out. assembly is reverse of removal.
To remove a headlight from a Lexus RX 300, first, ensure the vehicle is turned off and the keys are removed. Open the hood and locate the headlight assembly; you may need to remove screws or clips securing it. Disconnect the electrical connector from the back of the headlight, then carefully pull the headlight assembly out of the housing. Finally, replace the bulb if necessary or install a new headlight assembly by reversing the removal steps.
your headlight is probably full of water