0
The carburetor settings for a Husqvarna 266XP chainsaw typically involve adjusting the high (H), low (L), and idle (T) screws. The general recommendation is to set the low speed (L) for a smooth idle, the high speed (H) for maximum power without over-revving, and the idle (T) for a steady run when the chain is not moving. It's important to follow the manufacturer's specifications and consult the owner's manual for precise adjustments, as improper settings can lead to performance issues or damage. Always make adjustments in small increments and test the saw's performance after each adjustment.
What else can I help you with?
What are the carb settings for a 020AV stihl chainsaw?
turn in then 1 1/4 turns out on high and low factory settings hope this helps
McCulloch chainsaw carb adjustment?
The carb on a McCullouch chainsaw can be adjusted by turning the idle mixture screws. This controls how much fuel and air are mixed inside the carburetor.
Honda 200s carb adjustment?
Factory carb settings for a 84 Honda 200s
What is the routing for the fuel lines on a Poulan 3400 chainsaw?
Fairly simple. Fuel line up from tank.....underneath carb.....to right side of carb inlet fitting.
How do you adjust hi and low settings on a Homelite 330 chainsaw carb?
turn both hi and low fully clockwise till seated. then turn each 1 full turn counterclockwise then adjust your idle speed with idle set screw.
How do you adjust carb on 330 homelite chainsaw with 3 screws?
The carburetor on a 330 Homelite chainsaw can be adjusted with the 3 screws. Turning to the right increases the richness or gas flow. Turning to the left increases the air into the mixture.
Stihl 031av chainsaw Need carb settings low and high thanks?
High is 7/8 ths of a turn out from lightly seated. Low would be 1-1/4 turn out. This is ball park settings. The saw should run but will need fine tuning. Be careful not to turn the H screw in to far and lean out the mixture and damage the motor. http://store.chainsawr.com/
How fast will a 450 Honda foreman go?
47-52 depending on carb settings
What is the right settings for your 82 ford f-100 carb?
I cant kept it running
Kawasaki 650 x2 carb settings?
low 1 turn high 5/8
Carb settings for 041 stihl farm boss?
underneath the carb on the chain side (right hand side there are 2 small screws they look the sameone on top of the other. The top one controls the air to the carb (I think) the bottom controls the flow of gas to the carb. Turn the top one first remember where you had it to begin with and what direction u are turning it. If the does not help return the screw to its original position and do the same with the screw on the bottom. That should solve your problem if it is an air/ gas flow problem. If your chainsaw has been sitting for along time w/gas in it you will need to have it cleaned as the gas will turn to a shellack like substance in the carborator.
How do you reset a Honda cg 125 cc carb to its factory settings?
You will need to go into your settings to change them. If you are having difficulties, it is best to let a mechanic do the work.
