0
A strut typically experiences axial forces, which can be tensile or compressive, depending on whether it is being pulled or pushed. Additionally, it may be subjected to bending moments if it is not aligned with the load direction, as well as shear forces if there are lateral loads acting on it. In some cases, torsional forces can also be applied if the strut is twisted. Overall, the combination of these forces determines the strut's performance and structural integrity.
What else can I help you with?
What is a tie and strut?
A tie is a support that does its work by resisting tension forces. A strut is a support that resists compression forces, struts do NOT have to be vertical.Ties put tension on the object, while Struts put compression. Example: A balcony.
What happens when forces are unbalanced?
When the opposing forces are not balanced, it can result in :- 1. Translation - when the unequal forces are being applied at the same point. 2. Rotation - when the unequal forces are being applied at different points.
When two people together simultaneously push the table in the same direction the force applied is what?
The force applied is the sum of the forces exerted by each person. If both people are exerting the same amount of force in the same direction, then the total force applied to the table is the combined force exerted by both individuals.
Does the law of applied forces state that a body's change in mass is proportional to the amount of force applied to it?
No, the law of applied forces does not state that a body's change in mass is proportional to the amount of force applied to it. The law of applied forces states that the force applied to a body is equal to the mass of the body multiplied by the acceleration of the body. So, if the acceleration of a body increases, the force applied to it will also increase, but the mass of the body will remain the same.
What shape has best section modulus?
The answer depends of the forces applied to the beam: - for a single-directional force, the answer is a hollow rectangular shape (with the force applied on the narrow face); an I-beam is the second best. - For forces applied in two perpendicular directions, the answer is a hollow square section. - For forces applied from any direction, the answer is a hollow circular bar - a pipe.
What do you call it when you apply two forces together?
When two forces are applied in the same direction, they are added together and called the net force. When two forces are applied in opposite directions, the difference between the two forces is calculated and considered as the net force.
State that vibration is caused by effect of a single force or a succession of forces applied suddenly to elastic material?
Vibration is caused by the effect of a single force or a succession of forces applied suddenly to an elastic material. When these forces are applied, they create oscillations in the material, leading to the generation of vibrations.
What is the maximum mass that can be supported by a strut and cable arrangement if max force on the strut is 2500N?
Maximum upward force provided by strut = 2500NMaximum weight of the mass supported by strut = mg = -2500Ng = -9.8m/s2Max mass = max weight/g = - 2500N/-9.8m/s2 = 255.1kg
What are the type internal forces induced in a truss due to the externally applied loading?
The internal forces induced in a truss due to externally applied loading are tension and compression. Tension forces act to elongate the members of a truss, pulling them apart, while compression forces act to shorten the members, pushing them together. These internal forces enable the truss to maintain its structural stability and support the applied loads.
What are the forces that are applied to welded sturctural pipe?
The main forces applied to welded structural pipe are axial forces (tension and compression), bending forces, and torsional forces. These forces can come from external loads, such as weight or pressure, as well as internal forces due to temperature changes or fluid flow. Proper welding and design are essential to ensure the pipe can withstand these forces without failing.
What happens when two forces are applied to a car in an effort to move it?
When two forces are applied to a car in an effort to move it, the car will move in the direction of the greater force. The car's motion is determined by the difference between the two forces acting on it.
A bicycle is moving with constant velocity to the east. What is true of the applied forces?
The applied forces on the bicycle would be balanced. The force applied by the rider in pedaling is equal and opposite to the forces of friction and air resistance acting on the bicycle. This results in a net force of zero, allowing the bicycle to move with constant velocity.
