Red wire is Positive in a car battery. If they are not color coded, find which one is not connected to the chassis and this will be positive.
On the battery is marked - or +. The red cable is positive and the black is negative.
Most commonly there is a red cable and a black cable that conect to the battery. The red cable is the positive one. If the cables on your lawn tractor are color-coded, then the cable that connects to the battery post marked with a (+) is the positive.
To hook up jumper cables, attach one cable from the negative post on one battery to the negative post on the other battery. (These usually are marked "-" and have a blacl cable attached to them.) Attach the other jumper cable from the positive post on one battery to the positive post on the other battery. (These usually are marked "+" and have a red cable attached to them.)
To recharge the battery on a 2014 Dodge Avenger, connect the positive (red) cable clamp to the positive terminal of the battery, which is marked with a "+" symbol. Then attach the other end of the positive cable to the positive terminal of the charger. Next, connect the negative (black) cable clamp to the negative terminal of the battery, marked with a "-" symbol, and the other end to a metal ground point on the vehicle or the negative terminal of the charger. Always ensure the vehicle is turned off before connecting the cables.
In a 1993 Mercury Villager, the positive cable is typically connected to the positive terminal of the battery, which is usually marked with a "+" symbol and often has a red cover. The negative cable connects to the negative terminal, marked with a "-" symbol, and is usually black. To locate these cables, open the hood and look for the battery, which is usually situated in the front engine compartment. Always ensure safety by disconnecting the negative cable first when working on the battery.
In a Chrysler 300M, the positive battery cable is typically connected to the positive terminal of the battery, which is usually marked with a "+" symbol, often located on the driver's side under the hood. The negative cable is attached to the negative terminal, marked with a "-" symbol, and is also connected to the vehicle's chassis for grounding. Always ensure to disconnect the negative cable first when working on the battery to prevent short circuits.
The battery is under the saddle. The red cable goes to the terminal marked positive (+) and the black cable goes to the terminal marked negative (-).
the red cable if there is no red cable usuallly the thicker cable is positive if that does not work look under your vehicle for the starter and fallow the thick wire back to your battery and that is you positive cable.
Is the positive battery cable for a 1989 cheyenne a fused cable? Can I buy this cable at a Auto Parts Store?
Connect the Positive + battery cable to the positive + battery post first. Then connect the Negative - cable to the negative - battery post.
Yes, when looking at the battery in a Mazda Miata, the positive terminal is typically on the right side. The positive terminal is usually marked with a "+" sign and is connected to the red cable. Always double-check the markings on your specific battery model for confirmation.
Red cable to positive, black cable to negative.