DOT 3 is recommended for most production vehicles. If you need anything that is rated higher than that, there should be large warning labels somewhere near the master cylinder.
DOT 3 brake fluid
DOT 3 brake fluid.
what all i need to take a water pump on a 99 Chevy blazer what all i need to take a water pump on a 99 Chevy blazer what all i need to take a water pump on a 99 Chevy blazer what all i need to take a water pump on a 99 Chevy blazer
you can find the switch on the back of the brake pedal.
Type Dot 4 Brake Fluid Will Be Ok
A 1999 Ford Escort ZX2 ( in North America ) takes : DOT 3 brake fluid meeting Ford specification ( ESA-M6C25-A ) Helpfull
"E" Brake released all the way--pull on pedal if foot--make sure handle is totally seated if by hand--Make sure brake fluid level is full
To check the brake fluid level on a 99 Subaru Forester, you need to open the hood and locate the brake fluid reservoir. This is located on the master cylinder. There will either be a dipstick in the reservoir, or a line embossed on the side that says 'full.' If needed, add DOT 3 brake fluid.
yes
DOT 3
Dot 3
The 99 Blazer could be sluggish for several reasons. Check the air filter fuel pressure and EGR valve for a start.