0
What color wire is the remote wire when using an amp with a factory radio in a 2004 ford f150?
instead of hooking up your amps remote wire to your CD player, i would run the wire to your fuse box and wrap the striped wire around a fuse for something like the windshield wipers or acc or something that turns on when you want your amp on. and then put the fuse back in and then it's the same as plugging it into your CD player, except not as much work
What else can I help you with?
What color wire is the remote wire when using an amp with a factory radio in a 2005 f150 ford supercrew?
The remote wire on the factory radio in a 2005 F150 Ford Supercrew is usually blue. The remote wire is used to connect extra things to a radio that are not already factory installed.
What color wire is the remote wire when using an amp with a factory radio in a 2002 ford escort?
black
What color wire is the remote wire when using an amp with a factory radio in a 2000 Monte Carlo?
Yellow Wire.
When installing a new radio in a 1989 Dodge Caravan winfinity factory radio how do you integrate it with factory amp or bypass the amp?
if you are using an aftermarket wiring harness hook up the remote turn on wire on the new radio it should be blue with a white stripe to the harness also has a blue and white stripe and plug it in this wire turns on the factory amplifier if you are not using a harness you will have to locate the internal amplifier wire of the radio and connect that to the remote turn on on the aftermarket radio = answer = the inernal apm power wire is white on the black wire harness ANSWER if you dont want to use the factory amp. just run new speaker wires to each speaker.
How do you remove the factory radio from a 1996 sable?
by using the Ford radio removal horseshoe tools. Takes a couple of seconds.
How do you build model bread factory for school?
you can Build a factory by using a thermal sheet and color papers.......
Is there a way to utilize the factory installed satellite radio antenna in a car for a portable satellite radio?
yes because you are using the same radio frequency but as a portable device
How do you enter a factory code into a remote?
To enter a factory code into a remote, first ensure the remote is powered on and in the correct mode for the device you want to control. Next, press and hold the "Setup" button until the red indicator light turns on, then release the button. Enter the factory code using the number buttons on the remote; the red light should turn off after the last digit is entered. Finally, test the remote to ensure it operates the device correctly.
How do you wire after market stereo so CD sound comes through the speakers in Jeep Grand Cherokee?
you need to make sure tat the factory amp power (remote turn on) wire is connected using the blue wire off of the afermarket radio
How do you install a factory radio in a 2007 Honda s2000?
To install a factory radio in a 2007 Honda S2000, first, disconnect the negative battery terminal to ensure safety. Then, carefully remove the center console trim using a trim removal tool to access the radio. Unscrew the existing radio, disconnect the wiring harness and antenna, and then connect the new factory radio by reversing the disconnection process. Finally, secure the radio, reattach the trim, and reconnect the battery.
How do you tune a toshiba 2852db you have the remote?
cannot pay dvds in color when using the toshiba 2852db
How do you reset to factory settings an older model sansui TV using a universal remote?
To reset an older model Sansui TV using a universal remote, first ensure the remote is programmed to operate the TV. Then, press the "Menu" button on the remote, navigate to the "Setup" or "Settings" option, and look for "Reset" or "Factory Reset." Select this option and confirm the reset when prompted. If you can't find the reset option, refer to the TV's user manual for specific instructions related to your model.
