the air filter (depending on the engine will) two long bolts will go through the air filter and carb and will connect to the intake which should already be attached to the engine. the air filter will sometimes have a case on it though.
Inside the carburetor, where the gas line connects.
Exchanging an electric scooter into a gas-powered scooter generally involves replacing the whole of the engine to a gas-powered engine. The only exception is a gas-powered fuel cell, which maintains the scooter's electric usage, but uses a fuel cell to generate the electricity.
Turning over and firing and getting gas but not starting what is it
gas
samething it does on every other gas engine feeds the engine
To replace the Walbro carburetor on an AGM-30 gas engine, first, ensure the engine is off and cool. Disconnect the fuel lines and any linkages attached to the carburetor, noting their positions for reassembly. Remove the mounting screws or bolts securing the carburetor to the engine. Install the new carburetor by reversing the disassembly steps, ensuring all connections are secure before starting the engine.
On a 1982 Suzuki GS650 equipped with Mikuni carburetors, the gas line connects to the fuel inlet on the carburetor, typically located on the side or bottom. The vacuum hose connects to the vacuum port, which is used for the petcock operation, ensuring fuel flows when the engine is running. Additionally, there may be a hose for overflow or drain purposes, usually found at the bottom of the carburetor. Always refer to a service manual for specific routing and connections.
Yes, injected engines do not use a traditional carburetor. EFI gas engines do not have a carburetor, and diesel engines do not use a carburetor.
The float is probably stuck open.
Turn the fuel on and then take the gas hose that connects to the carberator off and if it leaks gas then the caberator should be receiving it
A carburetor regulates the flow of the air/gas mixture into the pistons of a gas engine. They aren't found on cars any longer but do still come into use for smaller gas engines.
If your engine has a carburetor the filter is in the supply line into the carburetor. If your engine is fuel injected the filter is right next to the gas tank in the fuel line.