0
FIRST thing I would do is remove the bulbs and check the PLUG slots for any sign of corrosion. This is a popular problem. Try and clean each slot on the plug with a small nail file or emmory board or even small piece of sandpaper. ALSO check the back of each plug to make sure there are no broken orfrayed wires and all three are securely conected to the plug. HOPE THIS SOVLES YOUR PROBLEM-GOOD LUCK!
What else can I help you with?
Where is the fuse for dash lights on your 97 Camry?
next at the battey 7.5 apm
Why would in-dash and tail lights go out?
I own a ford f150 and my tail lights are not working, but my brake work. What could wire or what could be causing that.
Reverse lights not working on 2002 Cavalier Fuses and bulbs are good?
The 2002 Cavalier has a reverse light switch. The switch can be bad, or have a loose connection causing the lights not to work.
Signal lights not working?
signal lights not working.
Harley Davidson 49cc mini bike anyone know about the wiring for the starter lights and Cylinoid?
get a wiring schematic for the Aeromacchi mini bike...same thing
If the fuses are all good whats causing the directional lights to stop working?
They are a compleat circuit if one light is bad it will not work
Brake lights not working third light does?
Probably the bulbs are burned out, or the sockets that hold them are not properly seated causing a grounding problem. FriPilot
Why would a Chevy 350 stop starting No clicks chugs whines - nothing Battery seems good lights fans radio ect all seem to be as strong as ever Truck ran ten minutes ago and now nothing?
check your ign. fuse. sounds like the starter cylinoid, but first make sure the battery is not dead(good head lights)check connections for corrosion and snug fittings. the cylinoid is located on the starter.the red wire from the battery goes to it.the problem could also be in the switch.to find where the problem is you will need to test power to the s termanal at the cylinoid with the switch in the "start position" if you have voltage when trying to start will indicate a bad cylinoid no voltage at start is a bad switch or wireing to the starter.
Passat 04 tdi indicator lights are not working?
If a Passat 04 TDI's indicator lights are not working, check the fuse. A blown fuse can cause the lights to stop working.
Crown Victoria blower not working head lights?
crown Victoria blower not working and head lights.
Changed brake pads lights not working?
my lights are not working when i changed the pads on my peutgeo partner van
Your dashboard lights on your vauxhall corsa are not working?
lights are very dim
