0
What could be the cause of the low beam lights not working when switching from high beam?
The simple answer may be that the low beam side is burnt out. Replace the bulb.
However, if both headlights have stopped working when switching to low beams, there may be a problem with the relay or the switch itself. If the cost of a relay is low for your car, it may be less expensive to simply replace that component than to have it diagnosed in a repair shop. Replacement of the switch requires some disassembly of the steering column or dash in most vehicles. Check a specific service manual.
What else can I help you with?
Could Switching lights off and on cause more kilowatt hours?
Switching lights off and on frequently does not typically cause a significant increase in kilowatt hours. However, turning off lights when not in use can help reduce overall energy consumption and save on electricity costs.
What could be the Cause of fog lights not working on a 2001 Audi A4 Quattro?
Bulbs burned out?
What could be the cause of your high beam lights working and the low beams not on your Chevy Malibu?
These lights have 2 different "lights" in each of them. This occurs frequently. Change out the bulb and everything will be working fine once again.
What would cause daytime running lights and check engine light and power windows and instrument gauges and lights to quit working as working?
All of these parts run on electricity, and for all of them to fail would be bad. Bad or burnt wiring could cause them not to work, or a alternator going bad could cause them not to work as well.
What could cause Brake lights to stop working on 1995 Chevy Suburban?
burned out bulb, blown fuse, wiring
What would cause the hazard lights to come on on their own after the car is turned off?
The light control module could be the cause of hazard lights coming on after the car is turned off. There could be a problem that has caused this module to become wet and it is now not working correctly.
Why are your headlights and tail lights working but your dash lights are not?
If parking and tailights are working could be headlight switch--rheostat for dimming control could be bad
What could cause the dim lights not to work. Brights are working and driving lights are working in a 94 grand prix Is there a dim light fuse?
The dim lights on a 1994 Grand Prix could go out when the headlamp switch is on if there is a short in the wiring for the headlights. There could also be a problem with the bulbs themselves if they were touched during installation. The oils in the fingers can short out new headlights.
On a Sienna 2003 both tail lights are not working is there a fuse that could cause this?
Yes, in the fuse panel. Open and read your owner's manual.
What would cause a lail light not to light but it lights when brakes are pressed?
The bulb could be 'blown'. Remove the working bulb from the other light and try it in the socket of the one that isn't working.
Your back lights dont work on a peugeot 206 what is the likely cause?
If the back lights on a Peugeot 206 are not working, make sure the bulbs are new. If the bulbs are not the problem, there could be an issue with the fuse.
Brake lights on your trailblazer not working?
If you brake lights are not working on your trailblazer it could be due to a number of reasons. Your fuse could be blown, or your light may no longer work.
