RMS is basically the amount of watts that the stereo can continuously dish out and the peak is like the most watts it can give out but only in bursts. And the the amount of channels is how many speakers it can give power too. So basically you can continuously give out 20 watts to each speaker if you have four hooked up to the thing.
how much energy it draws from your outlet or car battery.
Mono audio refers to sound that is recorded or played back using a single channel, while stereo audio uses two channels to create a sense of direction and space in the sound. Mono audio is typically heard as coming from a single source, while stereo audio can create a more immersive listening experience by separating sounds into left and right channels.
2.0 and 2.1 or even 5.1 regarding speakers means that there are 5 speakers to one output device such as the stereo. 2 speakers coming out of 1 stereo or 5 speakers coming out of one stereo. If you were to talk about 9.2 this would mean that there are 9 speakers but attached to 2 output devices such as a television as well as a stereo. Hope this has cleared up your problem.
Mono output refers to audio that is played through a single channel, while stereo output involves two separate channels for a more immersive sound experience. Mono output is typically used for simpler audio setups, while stereo output provides a more dynamic and spatial sound quality by separating different audio elements into left and right channels.
200Wx4 means you have 200 watts times 4 channels. Meaning you can get 200 watt speakers for the four corners of your car and the radio you have that has 200Wx4 will power them equally
st means stereo pan position stereo left n right =st
Stereo
Since the equation for watts is: Volts * Amps = Watts that would mean 12 Volts * 1 Amp = 12 Watts
2000 watts RMS is equivalent to 2000 watts. RMS (Root Mean Square) is a method used to measure the power of an electrical signal.
Do you mean " Stereo Hearts " If so, it is by Adam Levine feat, Gym Class Hereos
That means it can connect to a wireless Bluetooth headset that will put out stereo sound.
V on a light bulb means volts. W means watts.