0
What else can I help you with?
1986 Chevy Astro Van V6 43 hesitating on take off but then runs fine after that?
I think it's your EGR Valve. The EGR valve, or Exhaust Gas Recirculation valve, is a vacuum controlled valve which allows a specific amount of your exhaust back into the intake manifold.The EGR valve, or Exhaust Gas Recirculation valve, is a vacuum controlled valve which allows a specific amount of your exhaust back into the intake manifold. You'll know if your EGR valve is stuck or malfunctioning because your car will experience symptoms like rough idle and bucking on acceleration.
Did recently fit a new Exhaust Gas Recirculation Valve to Renault espace and is now running like new But the supplier sent two EGr valves so have a spare for sale If anyone interested.?
what year? and how much are you looking for it?
Would the egr valve also cause a 1994 silverado 5.7 to miss?
yes Yes, if the exhaust gas recirculation valve is faulty, the truck will sound like it is missing, but to a mechanic it may sound like a rough idle or a vaccuum leak. I would recommend changing the EGR valve as a process of elimination, being that it isn't a big ticket item.
What is the device used in cars and trucks to reduce carbon monoxide emissions?
You're probably thinking of the Catalytic converter, which is in the exhaust system and looks like a canister usually under the car around the front seats, but there are many systems imposed on vehicles to reduce emissions, such as an exhaust gas recirculation valve which takes some of the hot air from the exhaust and runs it through the engine again.
What does egr valve port look like on a 97 Acura 3.5 rl?
The EGR (Exhaust Gas Recirculation) valve port on a 1997 Acura 3.5 RL typically appears as a small, circular or oval-shaped opening on the intake manifold or near the EGR valve itself. It may have a metal or plastic port with a gasket or sealing surface. The port connects to the EGR valve and allows exhaust gases to be recirculated back into the intake system. It’s usually located near the rear of the engine, close to the cylinder heads.
What does EGR stand for and how do you know if your 1996 4x4 has it?
EGR stands for exhaust gas recirculation. It's a valve that opens up and runs some of your exhaust back through your engine again in the hope that some of the unburned gas will get burned the second time through. I'm not absolutely positive your truck has one but most likely it does. I suppose you could call an auto parts store and ask them. Exhaust Gas Recirculation. A standard EGR valve will be mounted on the intake manifold, typically a saucer like shape. An electronic EGR will have solenoids instead of the saucer shape. Depending on what make/model/year and engine size will determine what EGR you have, if you have one. "Exhaust Gas Recycling", and yes, your 96 should have one.
What kind of harm can happen to your vehicle when the EGR positioning is not positioned correctly?
The purpose of the EGR valve is to direct some of your exhaust gas right back into your intake. Hence the name: Exhaust Gas Recirculation. Sounds pretty ridiculous, huh? Well, exhaust gas actually helps your engine warm up more efficiently (so the valve is open when the block's cold), then the valve's supposed to shut off that exhaust intake when you're warm. If it stays open exhaust is always recirculated into the engine. It would be like taking your air filter off and driving continuously through a tunnel filled with exhaust. Nice, huh? The life, gas mileage, and horsepower of your engine are all reduced.
Where is the EGR Valve Located on a 1998 Chrysler Concorde 3.2 liter?
On a 1998 Chrysler Concorde with a 3.2-liter engine, the EGR (Exhaust Gas Recirculation) valve is typically located on the intake manifold, near the back of the engine. To access it, you may need to remove some components like the air intake and possibly the engine cover. The valve itself is connected to the exhaust system and has a vacuum line and electrical connector attached to it. Always consult the vehicle's service manual for precise location and removal instructions.
What solvent can you use to clean a egr valve?
To clean an EGR (Exhaust Gas Recirculation) valve, you can use a solvent like carburetor cleaner or throttle body cleaner. These solvents effectively dissolve carbon deposits and contaminants that accumulate on the valve. Make sure to follow the manufacturer's instructions and take appropriate safety precautions, such as wearing gloves and working in a well-ventilated area. Additionally, ensure that the cleaned EGR valve is thoroughly dried before reinstalling it.
Where is the egr valve on a 2003 Nissan Xterra?
The EGR (Exhaust Gas Recirculation) valve on a 2003 Nissan Xterra is typically located on the intake manifold, near the throttle body. To access it, you may need to remove some components like the air intake duct. The valve is a metal component with a vacuum line and electrical connector attached. Always refer to a repair manual for specific instructions and diagrams for your vehicle.
What does a egr look like on a 1998 Ford Festiva?
On a 1998 Ford Festiva, the EGR (Exhaust Gas Recirculation) valve is a small, cylindrical component typically located on or near the intake manifold. It features a metal body with an electrical connector and a vacuum line attached. The valve may have a small diaphragm and a spring mechanism inside for regulating the flow of exhaust gases back into the intake system. It's usually mounted with a couple of bolts and can be identified by its distinctive shape and connections.
What does the part for the exhaust gas recirculation circuit look like?
There are several parts to that EGR system. More details and include the year, make, model and engine info.
