A quart of 30-weight oil weighs approximately 7.5 to 8 pounds. The exact weight can vary slightly depending on the specific formulation and additives in the oil, but this range is typical for most motor oils of that viscosity.
IF it is virgin olive oil it will be fine.
The oil to use in a 2002 Montana depends on the climate. In summer, use a 10-40 wt oil. In the winter, a 10-30 wt or even a 5-30 wt is alright.
30 wt
30 wt oil
The Craftsman 6.0 Mower takes an oil that is at least 30 wt. A blended oil that is 10-30 is okay to use also.
30 wt, non-detergent. If you ask for it just that way, you can get it by the quart for less money than the stuff dyed green and put in little 3-6 oz bottles.
Depends on your fork setup, rider weight and your riding ability. Fork oil is available from 5 wt (thin oil = quick action) to 30 wt (heavy = slower action)
Most small engines use Sae 30 or 10w 30.
30 wt of a good brand if it is a Briggs or Tecumseh.
30 wt oil, or 30-weight oil, refers to the viscosity grade of motor oil as defined by the Society of Automotive Engineers (SAE). The "30" indicates that the oil has a specific viscosity at 100 degrees Celsius, making it suitable for moderate temperature conditions. This type of oil is commonly used in automotive engines and provides adequate protection and lubrication under typical driving conditions. It's important to choose the right viscosity for optimal engine performance and efficiency.
either 30 wt or 10w30 should be fine.
Any weight is better than not any oil! but if youre shopping , i used a 30 weight Valvoline winter, 50 wt in summer, straight 30 or 50, I drove trucks 15 years at a company full of different diesels! they only had 30 wt, until ur Detroit 2 stroke 8V92 drivers complained and got 50 wt for us.