it looks like a tie when you go to work or court or grautions
What you're referring to is a tie-rod. A tie-rod is a hardened straight rod that is threaded on either end. On the ends are ball joints that connect the steering knuckle to the steering rack.
Look under the front end of the car. You will find round bars, or rods going horizontally from the steering gear to the wheel spindle / steering knuckle assemblies on both sides. Those are the tie rods. There are 2 parts that make up the connecting tie rod: * The inner tie rod connects to the steering 'rack and pinion' assembly on the inside, and to the... * Outer tie rod, aka tie rod 'end' - which then mounts into the backside of the steering knuckle
A bad Tie rod usuallydoesn't SOUND like anything, but some good indicators that you have a bad tie rod are incorrect alignment, and uneven tire wear on your front tires.
The tie rod is a rod acting as a tie in a building or other structure. A tie rod is also referred to as a rod in the steering gear of a motor vehicle.
on a steering rack the inner tie rod is threaded and will be the mount for the outer tie rod.
I believe your referring to a tie rod, which is a steering component. There is an inner tie rod and an outer tie rod. The inner tie rod connects to the steering rack which is what is used to turn your wheels left or right. The outer tie rod connects to the inner tie rod and also to the steering knuckle. If you've got a newer 300 series car, chances are your gonna have them replaced because there are some problems with tie rods on these cars. A TIE rod connects the steering to the wheel.
Remove wheel and properly support vehicle. Remove outter tie rod from steering knuckle. Remove outter tie rod, count how many turns it takes to remove from inner tie rod. Remove inner tie rod boot. Use inner tie rod tool to remove inner tie rod. Install new inner tie rod (with inner tie rod tool) and do not overtighten. Properly install inner tie rod boot (you can use a zip tie on part that attaches to rack). Install outter tie rod and use the same amount of turns that you counted during removal (this will help with alignment). Install tie rod to steering knuckle and use a new cotter pin. Put wheel on and get an alignment.
I believe your referring to a tie rod, which is a steering component. There is an inner tie rod and an outer tie rod. The inner tie rod connects to the steering rack which is what is used to turn your wheels left or right. The outer tie rod connects to the inner tie rod and also to the steering knuckle. If you've got a newer 300 series car, chances are your gonna have them replaced because there are some problems with tie rods on these cars. A TIE rod connects the steering to the wheel.
Remove the tie rod nut. Pop tie rod out of the hole in spindle. Unscrew tie rod from steering box. Install new tie rod in reverse order. Have front end aligned.
lift vehicle. remove front tire. loosen jam nut securing inner tie rod to outer tie rod. if equipped, remove cotter pin from outer tie rod nut, which is attached to the knuckle. next, remove outer tie rod nut.with either a hammer, or a pickle fork and hammer. separate tie rod from knuckle. unscrew outer tie rod from inner tie rod. alignment is a must after job is finished.
The only way to repair a worn tie rod is to replace it with a new one. Remove the crown bolt from the tie rod. Use a tie rod "fork" tool to remove the old tie rod from the axle assembly. Unscrew the old tie rod from the rack and pinion assembly. Install the new tie rod in reverse order. Make certain to have the front end aligned afterward, otherwise you will wear out the tires and have poor control.
I believe your referring to a tie rod, which is a steering component. There is an inner tie rod and an outer tie rod. The inner tie rod connects to the steering rack which is what is used to turn your wheels left or right. The outer tie rod connects to the inner tie rod and also to the steering knuckle. If you've got a newer 300 series car, chances are your gonna have them replaced because there are some problems with tie rods on these cars.