A warped rotor makes a scraping noise. The rotor will no longer sit flush with the wheel and what ever it rubs against will create a loud metal scraping noise.
Worn bearings, loose rotor, warped brake rotor, sticking brakes.
A warped brake rotor is a rotor that's no longer flat. When viewed from the front or the rear, it'll no longer look like a straight line, but be a Little bit wavy.
Warped brake rotor.Warped brake rotor.
A damaged/rusted/warped brake rotor on the right front.
A warped rotor or rotors can cause a pulsation when applying the brakes. The car may shake a bit or a lot, depending on the condition of the rotor(s). Further diagnosis is recommended (and soon) as warped rotors may lead to loss of control of a vehicle that is braking.
Warped rotor(s)
Yes it sure can.
You have a warped rotor.
Check for a worn or warped break rotor on the front driver side. You may need to replace the break pads and rotor.
This can be a warped rotor or tire out of balance. If it only happens when braking it is a warped rotor.
Disk brake rotor is warped
YOU WILL WEAR YOUR PADS OUT PREMATURELY AND MAY CAUSE HOT SPOTS TO FORM IN THE ROTORS. HOTS SPOTS BECOME HARDER THAN THE REST OF THE ROTOR AND WILL CAUSE THE PEDAL TO HAVE A BUMPING FEELING WHEN YOU APPLY THE BRAKES. THE ROTOR WILL THEN HAVE TO BE REPLACED TO SOLVE THE PROBLEM. ALL IN ALL YOU SHOULD HAVE THE PROBLEM CHECKED AND REPAIRED ASAP. BRAKES ARE NOT A GOOD THING TO GAMBLE WITH FOR SURE.