The check engine light (service engine soon) comes on and stays on when a problem is detected by the self diagnosis system of your vehicle. Generally, the problem is in the emissions or something that is affecting the effectiveness of the emissions, but other causes can trigger the light to come on, too. To determine the cause, the vehicle will need to be taken to a parts store or a shop that has an OBD2 scanner, or for 1995 and earlier models, an OBD1 scanner, While a scanner will not give you the magic answer, it will give you a code that narrows down the problem area.
With an OBD II reader. Instructions come with the reader. Codes are standard.
It means there is a problem with the transmission and as such you should check with your BMW dealer.
Use a Mercedes specific or OBDII generic scan tool.
wat does ETS dash light mean on a mercedes ml 320
What are the codes?
Where is the light sensor is on 2003 C 320, and how to check it. My dash board message says "1 Malfunction" check light sensor. Please help.. Thanks...
it would most likely mean that something is wrong with the oil, im guessing that mybe the cap of the oil is open.. Go to a mechanic and he'll be glad to help !
5.2L if you meant 320 CUBIC inches (in3)
One can set an injector for a 320 diesel marine engine by setting the timing and duration.
I need to replace the odometer light on 1998 Mercedes ML 320.
One put's an injector on a 320 caterpillar marine engine through connecting it to the fuel pipes.
100+320=420/2=210 - the mean is 210.