0
The flashing code "FF" on the Sunbeam 33672 blanket typically indicates a malfunction or issue with the blanket's heating element or control system. This could be due to a faulty connection, a short circuit, or an internal error. To resolve the issue, it’s advisable to unplug the blanket, check for any visible damage, and refer to the user manual for troubleshooting steps. If the problem persists, contacting customer support or considering a replacement may be necessary.
What else can I help you with?
What does the flashing FF code mean on the thermostat of the Sunbeam Electric blanket?
A flashing "FF" would be an error code of some sort. Check the owners manual that came with the blanket, or call Sunbeam's customer service line and ask them.
What does the flashing FF code mean on the thermostat on the Sunbeam electric blanket?
A flashing "FF" would be an error code of some sort. Check the owners manual that came with the blanket, or call Sunbeam's customer service line and ask them.
What do you do if the sunbeam electric blanket says F2?
If your Sunbeam electric blanket displays an F2 error code, it typically indicates a problem with the blanket's temperature control system. To troubleshoot this issue, you should unplug the blanket, wait for a few minutes, then plug it back in to see if the error clears. If the issue persists, it is recommended to contact Sunbeam customer service for further assistance or to potentially have the blanket repaired or replaced.
What does the Ff code on the sunbeam electric blanket?
Just reseat the control plug at the base of the blanket with secure force. The main plug should be seated past the retainer catches on both sides of the plug. Then unplug the AC cord from the wall and replug to reset. This is a common problem for ALL Sunbeam electric blankets. The socket fits too tight and takes some strong-arm force to connect properly. Seems SB wanted to make sure you could not kick out the plug when sleeping.
What does F2 code on sunbeam heater controller SW404 mean?
The F2 code on a Sunbeam SW404 heater controller typically indicates a sensor issue. This could be due to a faulty sensor or a problem with its connection. It is recommended to unplug the heater, let it cool down, and then try resetting it to see if the code clears. If the issue persists, contacting Sunbeam customer support for further assistance may be necessary.
What is the name of the code using flashing lights?
It is basically just Morse Code.
What is flashing drive light on Honda?
It is flashing to let you know a trouble code for the transmission is stored in the computer. You have to take it to a shop to have the code read to find out what is wrong.
Why is the cruise control light flashing?
its setting a code
How do you reset your Daewoo Lanos radio code when the word CODE is no longer flashing?
So the CODE word of the day is what?
What does it mean when it is flashing code 12?
You need to reset the clock.
Why does 96 mustang airbag light keep flashing?
It is flashing a code for you to use in determining the reason the flashing purpose. in other words it has determined that there is a problem with the air bag system. it will flash the code for 5 times and the the light will stay on. it will be a 2 digit code. count the flashes to determine the code. Your Ford dealer can tell you what the codes mean and where to look for the problem.
What is the code that gets you a worn blanket on animaljam?
there is no code you have to trade or win it out of the claw at trading party
