0
What else can I help you with?
How do you hook up a 50 cc carburetor?
To hook up a 50 cc carburetor, first ensure the engine is off and cool. Attach the carburetor to the intake manifold using the appropriate gaskets and screws, ensuring a secure fit. Connect the fuel line from the tank to the carburetor's fuel inlet, and if applicable, attach the throttle cable to the carburetor lever. Finally, check that all connections are tight and there are no fuel leaks before starting the engine.
Where is the fuel filter on a lawnmower?
The location of the fuel filter depends on where the carburetor is mounted. If the carburetor is mounted directly atop the fuel tank, the filter is located within the tank at the end of the hose that attaches to the carburetor. The carburetor has to be removed to access the fuel filter. If the carburetor is not mounted to the fuel tank and the fuel is "gravity-fed" to the carburetor, the filter is usually an in-line filter located somewhere on the fuel line between the tank and the carburetor.
Where is the fuel filter located in a 1986 jeep Comanche v6 2.8L?
It's located at the rear of the carburetor, where the fuel supply line enters. You need to disconnect the fuel line from the carb along with some of the brackets holding the line. Gently pull the line back from the carb a few inches as to allow space to remove the filter. After replacing, be sure not to cross thread the fuel line back into the carburetor body.
Where is gas line on lawn mower?
The location of the fuel line depends on where the carburetor is mounted. If the carb is mounted directly on top of the fuel tank, the fuel "line" is the pickup tube that extends from the carburetor into the tank. The carburetor will have to be removed to get to the pickup tube. If the carb is mounted away from the fuel tank, the fuel line will come from the tank.
Is the 1970 350 small block chevy fuel filter location level with carburetor?
If it has a Rochester carburetor (like the quadrajet) it is actually located inside the carburetor where the fuel line attaches to the carburetor. To access it, remove the fuel line then remove the filter housing by loosening the large hex bolt you just removed the fuel line from.
Where is the fuel filter on a 1967 galaxie?
The fuel filter should be right in the carburetor, remove the fuel line nut and the line (or clamp and hose). There is a larger nut that the fuel line goes into, that is your fuel filter. Just unscrew it from the carburetor There maybe a in-line filter as well, it will be between the fuel pump on the engine (lower drivers side of block on v8) and the carburetor.
Where is a mowers fuel filter?
The position of the fuel filter depends on what type of fuel tank to carburetor system your mower uses. If the carburetor is mounted directly on the tank, the filter is located within the tank at the end of the carburetor pickup line. If the carburetor is mounted separate from the tank, the filter is usually on the fuel line somewhere between the tank and the carburetor.
Where is the fuel filter on a 73 firebird?
In the carburetor where the fuel line enters.
Where does the fuel line connect to carburetor on 1995 Dodge 1500?
A 1995 Dodge 1500 doesn't have a carburetor. It has a throttle body. A fuel line does not connect to the throttle body. The fuel is supplied to fuel injectors via a fuel rail.
Where is the fuel filter in a 1985 Chevy Celebrity?
If your engine has a carburetor the filter is in the supply line into the carburetor. If your engine is fuel injected the filter is right next to the gas tank in the fuel line.
How should the fuel lines for the ryobi 780R connect to weed eater?
For the Ryobi 780R, the fuel lines typically connect as follows: the larger line is the fuel supply line, which runs from the fuel tank to the carburetor, while the smaller line is the return line, if applicable. Ensure that the supply line is securely attached to the carburetor's intake port, and the return line, if present, connects to the designated port on the carburetor or back to the tank. It's important to check the manufacturer’s manual for specific diagrams and instructions to ensure proper connections.
How do you replace poulan chainsaw fuel line?
I'm having the same problem with my Poulan chainsaw and weed eater. I think the line starts with the fuel filter in the tank and travels up to the primer bulb, out of the bulb into the carburetor, and out of the carburetor back to the tank. Whatever the size of line is that hooks to the fuel filter is what will hook to the primer bulb and then the carburetor. Then one more single line returns to the tank. I may not be correct on this, but there's not much information available. The diagram on Poulan's website does not show the routing of the fuel lines. that is right but to remove the main line you need to drain fuel and pull the line out from the fuel tank neck first because it has a connection that will not fit threw the hole in top. to replace it cut new line at a slaint and fir it threw from the top down into the fuel tank. then keep it long and pull out enough threw the fuel cap to put fitting back on it and fuel filter then pull it back threw and hook it to primer bubble. Not sure about your answer I have two different size fuel lines on mine. The larger line if I remember correctly runs from primer bulb to the right of fuel tank where the larger opening is located. The smaller line is where I am confused at shouldn't the smaller line from the fuel tank that has in tank filter attached run up to carburetor. then a smaller line from primer bulb to second fitting on carb. byrumjr the line starts with the fuel filter in the tank and travels up to the carburetor out of the carburetor into the primer bulb, out of the primer bulb back in the tank
