answersLogoWhite

0

The shifter cable connects the shifter to the transmission.

User Avatar

Wiki User

10y ago

What else can I help you with?

Related Questions

How do you install a shifter cable on 1997 blazer?

The 1997 Chevy Blazer shifter cable will have swivel nuts on each end of the cable. Connect the shifter cable and turn the swivel nuts to the right to install the shifter cable.


How do you replace a broken shift cable?

Loosen the shifter cable not on each end of the shifter cable. The shifter cable will come off. Reverse the process to install the new shifter cable.


Where is the shifter cable in a 2002 Ford Windstar?

The 2002 Ford Windstar shifter cable goes from the back of the transmission to the bottom of the shifter stick. The cable is approximately 6 feet long.


How do you adjust an F-250 shifter cable?

How do you adjust an F-250 shifter cable? 2000 model


What is the clamp called that hold the shifter up into the dash?

The clamp that holds the shifter up into the dash is called a shifter cable bracket. It is designed to secure the shifter cable in place and keep it connected to the shifter assembly.


How do you change the shifter cable on a 1998 oldsmbile silhouette?

To change the shifter cable on a 1998 Oldsmobile Silhouette, first you need to disconnect the cable from the shifter, then disconnect it from the engine's control arm. Then replace it with the new cable and make sure it is functioning.


How long is the shifter cable on a 91 town car exec?

How long is the shifter cable on a Lincoln Town Car Exc


How do you change the shifter cable on a 1991 mercury tracer?

The shifter cable has retaining nuts on each end of the cable. Loosen the nuts. Remove the guide retainers. The cable will come off and can be replaced.


Why is your Ford F-150 shifter limp?

you probably broke the shifter cable. this is a metal cable that run from the shifter in your column to the prndl switch on the trans eay to fix and relatively cheap


How do you replace the shifter cable on a 1997 Lumina?

The 1997 Chevrolet Lumina shifter cable is held in place with a swivel nut on each end of the cable. Loosen the swivel nuts and the cable will come off.


What are the common signs of a broken shifter cable in a vehicle?

Common signs of a broken shifter cable in a vehicle include difficulty shifting gears, the gear shifter feeling loose or not engaging properly, and the vehicle not moving when the shifter is in the correct position.


How do you adjust a shifter cable on a 1995 crown Vic?

To adjust the shifter cable on a 1995 Crown Victoria, first, ensure the vehicle is in park and the ignition is off. Locate the shifter cable at the transmission and check for any slack. Use the adjustment nut on the cable to tighten or loosen it as necessary, ensuring the cable has the correct tension for smooth shifting. Finally, test the shifter movement to confirm proper adjustment and recheck the cable tension if needed.