0
For the speedometer cable to work properly in a 1978 Oldsmobile Cutlass Supreme with a 350 Hydramatic transmission, it requires a secure connection to the transmission and must be adequately lubricated. If fluid is leaking where the cable enters the transmission, it may indicate a worn or damaged seal, which could lead to inaccurate speed readings and potential damage to the cable. Addressing the leak by replacing the seal and ensuring the cable is properly installed can restore functionality. Regular maintenance of the cable and surrounding components is also essential to prevent future issues.
What else can I help you with?
When your speedometer is broken will it cause any other malfunctions?
On cars with an electronically controlled transmission, the answer is yes. The transmission may not shift properly.
The Check Engine Light came on and the transmission seemed to stop shifting properly and the speedometer is not working?
Bad speed sensor.
What would cause a 1991 Mazda Protege to have a blinking hold light and a non-functional speedometer?
The speedometer cable (which runs from the transmission to the dashboard) has snapped. This is a two-piece cable, and the one-piece cable in later Proteges will not work. I had the transmission replaced, and the cable could never be fit in properly. This is a mechanical speedometer, so you would have to change the entire speedometer part of the instrument panel to use a magnetic/electronic speedometer.
How do you replace speedometer cable for 1988 Mercedes Benz 190E?
To replace the speedometer cable on a 1988 Mercedes-Benz 190E, start by disconnecting the negative battery terminal to ensure safety. Locate the speedometer cable at the back of the speedometer cluster and at the transmission; carefully unscrew and pull it out from both ends. Install the new cable by inserting it into the transmission and securing it, then connect it to the speedometer, making sure it’s properly seated. Finally, reattach the battery terminal and test the speedometer for proper function.
How do you install a speedometer cable fora 87 Honda CRX?
To install a speedometer cable on an '87 Honda CRX, first, ensure the vehicle is safely lifted and secured. Remove the existing speedometer cable from the transmission by unscrewing it, then disconnect it from the speedometer in the dashboard. Next, route the new cable through the firewall and into the interior, connecting it to the speedometer first, and then securely attach it to the transmission. Finally, check for any obstructions and ensure the cable is properly seated at both ends before testing the speedometer for functionality.
What is wrong with the car when the speedometer needle goes crazy and you don't know how fast you're going?
If the speedometer needle is going crazy and not working properly, it is probably the speedometer mechanism that needs to be replaced. It could also mean the vehicle is having a transmission slippage problem if the needle is bouncing back and forth.
How do you fix a speedometer on a 1991 88 olds?
To fix the speedometer on a 1991 Oldsmobile 88, first check the speedometer cable for any breaks or disconnections, as a damaged cable is a common issue. If the cable is intact, inspect the speedometer itself for any signs of malfunction or wear. You may also need to check the vehicle's vehicle speed sensor (VSS) if equipped, as a faulty sensor can affect the speedometer's accuracy. If these components are functioning properly, consider consulting a professional mechanic for further diagnosis or replacement of the speedometer unit.
Changing speedometer cable Renault laguna?
To change the speedometer cable on a Renault Laguna, first, ensure the vehicle is securely lifted and supported. Disconnect the speedometer cable from the back of the speedometer and from the transmission, usually by unscrewing it or pulling it out. Replace the old cable with a new one, making sure it is properly routed and secured. Finally, reconnect the cable at both ends and test the speedometer for proper function before lowering the vehicle.
How do you replace the speedometer cable on a 2004 Buick Century?
Well, replacing the speedometer cable on a 2004 Buick Century is a wonderful opportunity to show your car some love and care. Start by locating the cable on the transmission and follow it to the back of the speedometer. Gently disconnect the old cable and replace it with a new one, making sure to secure it properly. Remember, there are no mistakes, just happy little accidents in the world of car maintenance.
Where does a 1995 Chevy Lumina's speedometer cable hook up?
In a 1995 Chevy Lumina, the speedometer cable connects to the transmission at the speed sensor. The other end typically attaches to the back of the speedometer gauge in the instrument cluster. To access it, you may need to remove the dashboard or instrument panel. It's important to ensure the cable is properly secured to avoid issues with speedometer readings.
Can you drop a 455 in an 88 Oldsmobile toronado trofeo and if you can what tranny should you go with?
Yes, it is possible to drop a 455 engine into an 1988 Oldsmobile Toronado Trofeo, but it may require modifications to fit properly. A compatible transmission option would be the TH400 or a 200-4R transmission, which can handle the power of the 455 engine.
What could be the problem on a 1993 Honda Civic VX If the speedometer odometer intermittently works and you have replaced the speed sensor on the transmission?
The cable that controls the speedometer needs to be replaced more than likely. That is what had to be done to a Dodge Stealth's speedometer to work properly. ==New Answer == Actually - there is no speedometer/odometer cable on a 1993 Honda. The system is all-electrical. So it has to be either a bad wiring harness/plug connector, OR a bad speedometer head (unlikely).
