Tread life refers to the longevity and durability of a tire's tread, indicating how long it can maintain optimal performance before it wears down. It is typically measured in miles and can be influenced by factors such as driving habits, road conditions, and tire maintenance. A longer tread life signifies that a tire can provide better traction and safety over an extended period, making it a crucial consideration for consumers when selecting tires. Proper care, such as regular rotations and maintaining correct tire pressure, can help maximize tread life.
So the tires will "wear" evenly and you will have longer "tread-life"
More than narrow tread tires.
Only if all tires have the same amount of tread left.
The best ways to maintain the longevity of tires with no tread are to regularly check tire pressure, rotate tires every 6,000-8,000 miles, and avoid sudden stops or sharp turns. Additionally, driving at moderate speeds and avoiding rough roads can help extend the life of tires with no tread.
It means it is a tire for a passenger car and tread is 235mm wide.
Minimum tread depth for all 4 tires is 2/32"
60% tread wear.
"directional tires" refers to tire with eitherasymmetrical or rotational tread patterns.Pros of rotational tires:1) generally better resistance to hydroplaning than traditional tread patterns2) generally better stopping than traditional tread patterns3) generally better heat dispersal than traditional tread patterns4) typically look pretty niftyCons of rotational tires:1) cannot "cross" during tire rotation2) if used for a full-size spare, likely to lose benefits in "pros"3) Are more likely to be "performance tires" (check with your tire seller) with a shorter expected tread life than some other tires. This is not always so.Pros of asymmetrical tires:1) Typically better cornering stability2) Allows for multi-compound tread for reduced shoulder wear (longer tread life at the edges) and better temperature controlCons of asymmetrical tires:1) must be replaced exclusively in pairs (axle sets) to prevent 'tire pull'
Many tires have tread wear indicator bars molded into the tread. When the tread is worn down to where you can see a solid bar of rubber across the width of the tread, it is time to replace the tire.
highway tread usually associated w summer or all season tires
Generally when purchasing tires for a vehicle how many you should purchase depends on the type of vehicle you drive. For all wheel drive or four wheel drive vehicles it is recommended to replace all four tires at a time to be sure all tread patterns match. For front or rear wheel drive vehicles the tires on both the front and rear axle should match each other and can be purchased in sets of two if needed. Tire rotation is generally done to maintain the tread life on your tires and tread life warranty from the manufacturer if any. Without rotating your tires they will suffer from excessive treadwear that can lead to early replacement. Tires should be rotated at intervals of every 6,000 to 7,000 miles or every second oil change to maximize tire life, rotating tires is designed to extend your tires life and won't help if your tires already need replacing.
A good tire rating website is tire-ratings.findthebest.com.They can provide you with some good information, such as tread life about the Hercules tires you want.