You will get a lumpy idle due to very high compression. also you might blow your head gasket out or crack a piston or connecting rod.
An engine cylinder misfire has been detected in the # 3 engine cylinder
An engine cylinder misfire has been detected on the # 4 engine cylinder
After the cylinder head or block have been skimmed. For example. An engine has overheated and the cylinder head has been warped. The head is removed and milled so that the mating surface is flat again. The thickness of the oversized gasket will depend on the amount of material removed. If a thicker gasket wasn't used, the compression ratio may be raised or the pistons may come into contact with the valves
An engine cylinder misfire has been detected in cylinder # 1
An engine cylinder misfire has been detected
An engine cylinder misfire has been detected
A Dodge Intrepid has never been offered with a 4 cylinder engine.
The cylinder, is the body of the engine that has been bored out in order to place a piston inside of it. The piston rides inside the cylinder.
About 24 million gallons of oil have been skimmed from the Gulf of Mexico so far.
An engine cylinder misfire has been detected in the # 6 engine cylinder The engine cylinder locations are numbered : firewall 3 - 6 2 - 5 1 - 4 front
An engine cylinder misfire has been detected in cylinder # 1
If the check engine light is flashing that indicates an engine cylinder misfire has been detected