The type of fork oil you should use depends on your motorcycle's specifications and your riding style. Generally, refer to the owner's manual or manufacturer guidelines for the recommended viscosity, which is typically measured in weight (e.g., 5W, 10W, 15W). For more aggressive riding or heavier loads, a higher viscosity oil may be preferred, while lighter oils are suitable for smoother, more controlled rides. Additionally, consider the brand and type (synthetic vs. mineral) for optimal performance.
what oil viscosity should i use a gsx 1400
475ml in eack fork and you should use 10 weight oil.
fork oil amounts for a Yamaha GT 80 are 108 to 116cc's per fork tube. you should use 10w motorcycle fork oil. this is good for all years from 1974 to 1980.
You can buy Honda fork oil or just use transmission fluid. Either will work.
For a Yamaha Virago 535 front fork system, it’s generally recommended to use 10W fork oil. However, you should always check the owner's manual or service manual for specific recommendations, as oil viscosity can depend on your riding style, weight, and local conditions. Additionally, consider using a high-quality synthetic fork oil for better performance and longevity.
they use 475 cc of oil
How much fork oil do you use on a Aprilia SR50LC-`96?(ivg@mail.bg)
According to the Kawasaki site you should use SE class SAE 10W40, 10W50, 20W40 or 20W50 oil for the engine. You use SAE 10W oil for the front fork.
how much fork oil in a rm 85
10w fork oil. 130-140 ml from top of fork, when fork is fully compressed without the spring inside the fork.
Polaris has their own special "fork oil". 7.5 weight is equivalent to polaris oil or use a 10 weight to improve dampening.
To check the fork oil on a 2007 Harley-Davidson Super Glide, first, ensure the motorcycle is on a level surface and securely supported. Remove the front wheel and fender to access the fork tubes. Use a fork oil level tool or a measuring device to determine the oil level by removing the fork cap and inserting the tool into the tube. The oil level should typically be around 4.5 inches from the top of the fork tube when fully compressed; adjust as necessary by adding or draining oil.