What fuse controls the brake lights on a 1998 Chevy Camaro?
It should be labeled on the fuse block.
Fuse 7 controls the brake lights. It should be a red 10amp fuse.
there is a brake light fuse in the pannel you just need to look for it.
On the fuse box under the hood it shows STOP and HORN that should be for the brake lights
It is not necessarily the fuse. It could be the switch on the brake that is not closing the circuit.
the muscatel middle school! (^^)
7
After fuse (should be labeled) Try bulbs and defective stop light switch
Check the brake light switch on the brake pedal
After further research I am answering my own question. It is fuse number 6 on the fuse block located under the dash and is a 10 amp fuse.
its probably not a fuse at all, but it could be your brake light switch. its under the dash hooked to the pedal. I had to replace one on my 84 t-bird
Check stop light fuse Check bulbs double filamented smaller for brake lights Check the operation of the stop light switch Check socket for corrosion
It should say TAIL for taillights or maybe brake lights.