Fuse nineteen goes to the fog lights. The fuse box as well as the manual should have a diagram of the fuse box.
The fuse for the hazard lights on a 2001 Jeep Wrangler is located in the fuse box under the dashboard on the driver's side. You can find the fuse box by removing the cover beneath the steering column. The specific fuse for the hazard lights is usually labeled in the fuse diagram on the cover or in the owner's manual. If the hazard lights are not functioning, check this fuse for any signs of damage or a blown fuse.
You could have a blowen fuse or a faulty connection!
behind the glove compartment
fuse, bulbs, switch on brake pedal.
There are a couple of reasons why a 1993 Jeep Wrangler tail and brake lights may not work. The light bulbs may be blown or a fuse may need replaced.
For a 1993 Jeep Wrangler with a 4.0L six-cylinder engine, the fuse associated with the dash lights is typically fuse number 4 in the fuse box. This fuse controls the instrument panel lights. If the dash lights are not working, checking and replacing this fuse, if blown, is a good first step. Always consult the owner's manual for the exact fuse layout specific to your vehicle.
Yes if you want the radio, int lights, etc to work.
Check the bulbs, then the fuse, then the switch at the pedal.
Should be on same circuit as other brake lights
Under the dash, up against the firewall, on the drivers side.
remove fuse-Look in manual for which one
A 2008 Jeep Wrangler has one fuse box, it is under the hood next to the battery.